Active Member
|
Address: Chenggong indutrial park Xinglian Industry Area, Liucheng, Fujian Province, China
Phone: 86-595-86368778
Contact name:slina chan
FUJIAN CHENGGONG MACHINE TOOL CO.,LTD. |
|
Specification | Unit | Model C5116E-2 |
Max. turning diameter | mm | 1600 |
Table diameter | mm | 1400 |
Max. height of work piece(H) | mm | 1500 |
Max. weight of work piece(W) | kg | 5000 |
Speed range of table(16steps) | r/min | 5-160 |
Feeding range of tool holder(12steps) | mm | 0.8-86 |
Vertical tool rest ram stroke | mm | 1000/1250 |
Horizontal travel of side tool holder | mm | 630 |
Vertical travel of side tool holder | mm | 980 |
Max. turning diameter of side tool head | mm | 1400 |
Travel of cross rail | mm | 1250 |
Rapid traverse of tool holder | mm /min | 1800 |
Swing angle of vertical tool holder | ±o | 30 |
Max. cutting force of tool holder | KN | 25 |
Max. cutting force of side tool holder | KN | 20 |
Max. torque of table | KN.m | 25 |
Height of tool bar section | mm | 40 |
Power of main motor | KW | 22/30 |
Overall dimensions of machine(L×W×H) | mm | 2800×3000×3660 |
Weight of machine(approx) | Kg | 14500 |
Note: Manufacturer reserves the right to improve & modify without prior notice.
Features:
1. This machine is used for various rough and finish turnings including internal and external cylindrical surface, conical surface, end face and grooving.
2. The work table uses dynamical pressure slide-way and NN30 dual cylinder roller bearing. It features high bearing capacity and revolving precision.
3. Pentagonal tool slide is set on the vertical tool head, square tool slide is set on the side tool head. Both tool heads are balanced hydraulically.
4. The machine is controlled by PLC. With the DRO, it is of high reliability.
5. The machine has good shape and it is easy to operate.
6. The side tool head and the taper accessories are provided according to special demands.
