Active Member
|
Address: 23M,Shidai Bldg.,Linyuan road,Mianyang,sichuan
Phone: 86-816-6075677
Contact name:Mr. gus zhang
Mianyang Prochema Commercial Co.,Ltd. |
|
Transparent Conductive ITO Film Specifications Model: PROX-100 Resistance: 100ohm/sq Thickness: 0.125 or 0.175mm Roll Width: 1200mm Roll Length: 100-200m Application:Used For Producing Electroluminescent Printable Light / EL Lamp/EL Panel/ electroluminescent sign Customized width acceptable. |
Electroluminscent advertising panel/Epaper is an vivid indoor advertising ,the programed animation attract more eyeballs than static advertising graphics.
Prochema ITO film PROX-100,PROX-200 is a good transparent electrode
of EL and Epaper display.
Regular thickness 125 and 175 microns in width 600-1200.
Prochema is specializing in ito film production for 11 years |
Item | PROC-14 | PROX-35 | PROX-50 | PROX-100 | PROX-200 | PROX-430 |
Thickness (microns) | 50/125/175 | 125/175 | 125/175 | 50/100/125/175/188 | 125/175 | 188 |
Width (mm) | 1200 | 600,1200 | 600,1200 | 600,1200,1900 | 600,1200 | 406 |
Resistance (ohm/sq) | 12-15 | 30-40 | 50-60 | 90-110 | 190-220 | 400-450 |
Application | EMI shielding,
Transparent Electrode | Electroluminescent printing/EL panel,
E-paper, touch sensing,
Capacitive touch key,
PDLC glass film
ITO Heating Pad | Electrode,
EL printable lamps | Touch screen,
Sensing | ||
Remark: Low resistance EMI shielding film also available!
Prochema Advantage |
Best Quality | Produce ITO FILM for more than 10 years |
Famous Partners | Stable supplier for Honeywell,SIEMENS,LG,Mekoprint.etc. |
Flexible Order Quantity | Quantity upon your demand |
Short Delivery | Within 1 WEEK for order quantity under 1000 sqm |
Flexible Trade Term | EXW,FOB,CIF,CFR,DDU. Door to Door service |
Economical logistics | Cost saving for 30% than official Logistics (By DHL, Fedex, TNT, UPS, EMS etc) |
Low Shrinkage High Optical PET Substrate Film Is Suitable For EL Panel Printing |
Due to the thermal shrinkage of ITO PET Film, film sheet need to be cut generally 1% larger than the size of the
EL panel,
and before printing,need to heat the film for shrinkage to make the
film size stable. generally at 120C for 2 hours .
NOTE :the temperature and time of heat should be higher and longer than the temperature and time of sliver paste heating.
PET FILM Thermal Shrinkage | MD | 0.5% | 150C *30 MIN |
TD |
0.2 % |
Technical Data For 100ohm/sq ITO PET FILM |
Model:PROX-100 (100ohm/sq,125 or 175micron)
Property | Units | Data | Test Method | |
1 |
Visible Light Transmission |
% |
≥78 |
Spectrophotometer |
2 | Hue (b value) | - | 0≤b≤4 | Spectrophotometer |
3 | Haze | % | ≤1.5 | Haze Meter |
4 | Thickness | micron | 125 or 175 | Spiral Micrometer |
5 |
Square Resistance |
ohm/sq |
95-105 |
Four P |
