Active Member
|
[China]
Address: No.22 East Boai Road, Shishan Industrial Park, Foshan City, Guangdong Province, China
Contact name:Ms.Eva
Foshan Minghong Mechanic Equipment Co., Ltd. |
|
|
1800T Aluminum Profile Handling System for Aluminum Extrusion Press/ Four Step Belt
The equipment is used for transferring aluminum profile after extrusion, it including products conveying,pulling,straightening,gauging and cutting. It is easy operation and efficiency
This equipment consists of initial lead table, roller sleeve up-down conveyer (adjustable speed),
run-out transfer table (belt type), cooling table (belt type),stretcher, stretcher transfer table(belt type),batching table(belt type), saw transfer table (roller sleeve type), product saw table, length gauge table, automatic control system.
Technical Parameter
Model: 1800T Direction: Left
Type: Four steps felt belt transmission (up/down type)
Specification: 38000mm (L)*9000mm (W)* 800mm (H)
InitialTable ( Equip With Water Tank)
Initial table equip PBO felt sleeve
| Cooling type | up initial lead table, equip 4 sets of cooling ducts |
| Water tank length | 4000mm (L); Water tank material: upper is 304 stainless steel, lower is Q235A steel other parts is A3 steel. Equip with graphite plate, |
| Water Tank type | Over - Floated Type |
Up / Down Type Run Out Table
| Equip conveying rollers with high temperature resistant roller sleeve |
| Transmission type: single row chain adjustable transmission |
| Equip one set of cycloid motor with gear box, |
| Equip one set of frequency transformer,3KW; |
| Equip one set of hydraulic unit; |
| Equip one set of safety protective cover; |
Transfer Table
Equip aluminum conveying beam with high temperature resistant felt belt |
| Individual felt belt can be changed without dismantling axle; |
Cooling Table
| Equip aluminum conveying beam with Kevlar heat resistant endless felt belt |
| Equip 1 set of cycloid motor |
| Individual felt belt can be changed without dismantling axle |
| With the reversion function |
Transition Table
| Transition seat retractable moving, equip aluminum conveying beam with middle temperature resistant felt belt |
| Individual felt belt can be changed without dismantling axle; |
| With the reversion function; |
Stretcher
| Clamp type: finger type clamp(hydraulic); |
| Stretcher bed:25# channel steel andФ70mm round steel; |
Storage Table
| Equip aluminum conveying beam with middle temperature resistant felt belt |
| Equip one set of cycloid motor |
| Individual felt belt can be changed without dismantling axle; |
| With the reversion function; |
SawTransfer Table
| Equip conveying roller with low temperature resistant roller sleeve |
| Equip one set of hydraulic unit |
Finish Saw
| Cutting type: down type, pneumatic clamp, effective stroke 800mm, cutting height 180mm |
| Cooling type: The atomization type oil cooling spray system; |
Saw Gauge Table
| Effective gauge range: 1000-6000mm; |
| Equip aluminum rollers with heat resistant sleeve |
| Equip precise manual gauge device (adjustable); |
