Home Companies Anhui SURE ELECTRONICS CO.,LTD

Aluminum Alloy DC12V 25Amp Lead Acid Battery Charger For Electric Vehicles

Active Member

Contact Us

[China]

Address: NO.58 PARK,QINLAN TOWN TIANCHANG CITY CHINA

Contact name:Lavia

Anhui SURE ELECTRONICS CO.,LTD

Aluminum Alloy DC12V 25Amp Lead Acid Battery Charger For Electric Vehicles

Country/Region	china
Categories	Voltage Regulators/Stabilizers

Product Details

24v 10a Lead Acid Float Car Battery Charger

Product Description


Input :	110V/220V adjustable, 47-63HZ
Specification :	DC12V 25Amp Lead Acid Battery Charger
Constant Charging Voltage :	14.7V (12v lead acid battery)
Float Charging Voltage :	14.7V(Float charge only for Lead acid batteries)
Constant Charging Current :	20-25A
Charging Mode :	3 Stages, CC, CV, Trickle
Material :	Aluminum alloy with Fan
Dimension :	20712070mm
Net Weight :	2.5kg
Application :	Electric Vehicles & Tools
Various Protection :	Over current , Over Voltage , Over Temperature , Short Circuit and Reverse Polarity.
Warranty:	2 YEARS

Operating Instructions:

1. Plug the AC-to-DC adapter to electrical outlet and connect the other end to charger
2. LED will change to Green, which indicate power is on and ready for charging mode
3. Insert CRV3 / RCRV3 battery into charger
4. LED will turn RED, which indicate the battery is charging
5. When the battery is fully charged, LED will change from red to green
6. Remove the battery pack from the charger
7. LED will change back to green once you remove the battery from charger

FAQ:

1. The LED turns off while charging.
-This charger has a build-in thermal protection function. Battery charging is shut off when the temperature of charger increases beyond set limit, and LED turns off (no color). Once the charger temperature drops to acceptable limit, the charging process is resumed and the LED turns on (Green/Red color).

2. LED color changes to Yellow
-This indicates that battery is not being charged correctly. Remove the battery pack from Charger and re-insert into charger. If this occurs repeatedly, either battery is dead or charger is not working.

3. Battery is inserted in the charger, but the LED does not change to RED.
-This indicates that battery is not being charged correctly. Remove the battery from charger and re-insert into charger. If this occurs repeatedly, either battery is dead or charger is not working.

4. LED changes to Green, but the capacity is too low.
-This indicates that battery is not being charged correctly. Remove the battery from charger, clean the contacts with a soft clean cloth, re-insert into charger. If this occurs repeatedly, either battery is dead or charger is not working.

Description
Microprocessor Control (CPU).
3-STAGE AUTOMATIC CHARGING:
This is a fully automatic battery charger with 3 charge stages.
Automatic charging protects your battery from being overcharged. So
you can leave the charger connected to the battery indefinitely.
3-stage chargers are suitable for most lead acid battery:Calcium,
Gel and AGM, Wet batteries. They may also help restore drained and
sulphated batteries.

1:Input Characteristics:

Input Voltage: 100-240V AC
Input Frequency: 50Hz or 60Hz and single phase.
Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A
Max.@230Vac/50HZ
Efficiency: ≥85.0% 230Vac/50Hz(Typical full load)

2:Output Characteristics:
Constant Charging Voltage: 14.7V Float charge 13.8V
C:Charging Mode Intelligent 12V 5-6A lead acid battery charger

3 Stages, CC, CV, Trickle

4:Safety Test for battery charger
Hi-pot Test:15KVac 5mA 3 Seconds between input and output test
Resistance:The liftpo4 battery charger insulation resistance shall
be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds
Drop test: Height: The wheelchair battery chargerconform to BS
EN60068-2-32:1993 TEST ED: free fall appendix B

5:Protection for battery charger
Over Voltage Protection:The power supply will be auto recovered
when faults remove
Over Current Protection: Charger output current does not exceed the
set maximum battery charging current.
Over Short Circuit Protection :Battery charger output can be
shorted without damage No odor, smoke, fire, plastic deformation,
and excessive heal happen. The power shall be auto-recovery. (It
will enter into normal condition when then the fault condition is
removed)
Over reverse polarity Protection When the battery charger output
line reversed after the charger will not work until the right user
access only to start.
 

Our Services

Our Service

1. OEM Manufacturing welcome: Product, Package,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.