Results fore27 photo lampfrom 25 Products.
|
|
E27 Lampholder gauges | "NOT GO" Gauge for Screw Thread Lampholder E27 | 7006-26-4 Purpose: the check the maximum minor diameter of the screw thread, dimension D1, of lampholder ...
|
|
|
|
|
Aluminum Tripod Light Stand Air Damped Lamp Tripod Stand Flexible Photo Light Stand Height 2M-4M 1. Tripod Stand for Lighting description: Main features Aluminum alloy manufacturin...
|
|
|
|
|
Low-wattage tube ceramic metal halide lamps Excellent color rendering index High color stability during the entire lifetime 8000~12000 hours average lifetime, high light efficiency ...
|
|
|
|
|
E27 Lamp cap gauge | go gauge for dimension "S1" of E27 caps on finished lamps | 7006-27C-1 Purpose: to check the dimensions S1 minimum and S1 maximum of E27 caps on finished lamps ...
|
|
|
|
|
E27 Lamp Cap Gauge | "NOT GO" Gauge for E27 Caps On Finished Lamps | 7006-28A-1 Purpose: to check the minimum outside(major) diameter of the screw thread, dimension "D" of E27 caps ...
|
|
|
|
|
E27 Lamp cap gauge | "GO" Gauge For E27 Caps on Finished Lamps | 7006-27B-1 Purpose: to check the maximum dimensions of screw thread and dimension T1 minimum of Caps on finished ...
|
|
|
|
|
E27 Lamp cap gauge | Gauge For Caps on Finished Lamps for Testing Protection Against Accidental Contact E27 | 7006-51-2 Purpose: to check protection against accidental contact of ...
|
|
|
|
|
E27 Lamp cap gauge | Gauge For Finished Lamps Fitted With E27 Caps For Testing Contact Making | 7006-50-1 Purpose:To check lamp dimensions for contact making in I.E.C holders. LED ...
|
|
|
|
|
E27 Lamp cap gauge | Gauge For Caps On Finished Lamps for Testing Protection Against Accidental Contact During Insertion E27-7006-51A-2 Purpose: to check protection against ...
|
|
|
|
|
E27 Lampholder gauges | Gauge for Testing Protection Against Bulb-Neck Damage And For Testing Contact- Making in Lampholder E27-7006-21-5 Purpose: to check: a) protection against ...
|
|
|
|
|
E27 Lampholder gauges | Gauge For Testing Contact-making and Protection Against Accidental Contact During Insertion Of Lamps in Lampholdes E27-7006-22A-5 Purpose: to check E27 lamp ...
|
|
|
|
|
E27 Lampholder gauges | "GO" Gauge For Lampholder E27 | 7006-25A-2 Purpose: to check a) the minimum dimensions of the lampholder screw thread according to sheets 7004-21 and 7004...
|
|
|
|
|
E27 Lampholder Gauges | Gauge for Detecting Side-contacts with Cutting-Edges in Lampholders E27 | 7006-22B-1 Purpose: to detect the existance of cutting-edges on side-contact in ...
|
|
|
|
|
Items Model Description Standard E27 Lamp cap gauge 7006-27B-1 go gauge for E27 caps on finished lamps IEC60061-3
|
|
|
|
|
Items Model Description Standard E27 Lamp cap gauge 7006-51A-2 gauge for caps on finished lamps for testing protection against accidental contact during insertion E27 IEC60061-3
|
|
|
|
|
E27 Lampholder gauges | Gauge I for Checking Side-Contact Resiliency In Lampholders E27 | 7006-22C-1 Purpose: to check the minimum side contacts resiliency of E27 lampholder. ...
|
|
|
|
|
PURPOSE: To check: (a) Protection against bulb-neck damage by the rim of the E27 lampholder. (b) Contact-making in E27 lampholders with respect to lamps having dimensions adverse ...
|
|
|
|
|
IEC60061-3: 7006-22A-5 E27 Gauge for Testing Contact-Making and Protection Against Accidental Contact During Insertion of Lamps in Lampholders The drawing is intended only to ...
|
|
|
|
|
E26d Lamp Cap Gauge | Gauge With Reference Diameter Of 23mm For Caps E26d | 7006-29B-2 PURPOSE To check dimensions Smin., Smax., S1min. and S1max. of caps E26d. TESTING When the ...
|
|
|
|
|
IEC60061-3: 7006-22C-1 E27 Gauge I for Checking Side Contact Resiliency in Lampholders For details of gauge II, see sheet 7006-22D. The conical part and the screw-thread of the ...
|
|
|
