Portable Dustless Sandblasting Machine Surface Interior Coating Removal

Portable Dustless Blasting Machine for Industrial Surface and Interior Coating Removal

Dustless Blasting Equipment Introduction:

The water blasting machine produced by our company is based on the traditional dry blasting machine and developed by our company. The control system is improved. It completely ended the problem of serious dry blasting pollution, and the dust was well controlled. Unlike the current wet blasting equipment, the water blasting machine requires very little water and can evaporate quickly, without causing large areas of water. The injection pressure can be adjusted freely between 0.3-0.7Mpa. Under the same conditions, The amount of sand used is only one-fifth of that of dry blasting, and the sprayed abrasive can be recycled and reused, greatly reducing the cost of use. Our company's water blasting machine: environmentally friendly cleaning, less sand, more economical, worthy of the use of the majority of users.

Basic parameters:

key Features:

Sandblasting machine metal parts cannot be damaged, dimensional accuracy will not change.
2. Parts surface is not affected by pollution, abrasive will not react with parts material.
3. The sandblasting machine can easily deal with grooves, concave touching part.

4. Handling cost is greatly reduced, mainly embodied in the sandblasting machine work efficiency, can satisfy the requirement of all customers.
5. Low energy consumption, cost-saving.
6. Sandblasting procedure is eco-friendly, no pollution to the environment.

Check the Operating Video in Our Youtube Channel Link Below: