|
[China]
Trade Verify
Address: No. 501, Changsheng South Road, Occident Biotechnology Industry Park, Jiaxing, Zhejiang
Contact name:Cherry Gao
Jiaxing MT stainless steel co.,ltd. |
|
Verified Suppliers
|
|
|
Alloy 601 / 625 N06600 / N06625 Nickel Alloy Plate Cold Rolled Technology
| Material Grade | Alloy 601 / 625 N06600 / N06625, Alloy C276/N10276, Alloy B/UNS N10001, Alloy B-2/UNS N10665, Alloy B-3/UNS N10675, Alloy C22/UNS N06022,Alloy 800/N08800, Alloy 825/N08825, Alloy 400/N04400; etc |
| Outer Diameter | 3.18mm-101.60mm |
| Wall Thickness | 0.50mm-20.00mm |
| Length | Normally fixed length 6m, can as per customer’s requirement |
| Standard | ASTM B163; ASTM B167; ASTM B444; ASTM B622 etc. |
Alloy 601 Chemical composition
| % | Ni | Cr | Fe | C | Mn | Si | S | Al | Cu |
| min | 58.0 | 21.0 | balance | 1.00 | |||||
| max | 63.0 | 25.0 | 0.10 | 1.00 | 0.50 | 0.015 | 1.70 | 1.00 |
Alloy 625 Chemical composition
| % | Ni | Cr | Mo | Fe | C | Mn | Si | P | S | Co | Nb+Ta | Al | Ti |
| min | 58.0 | 20.0 | 8.0 |
| 3.15 | ||||||||
| max | 23.0 | 10.0 | 5.0 | 0.10 | 0.50 | 0.50 | 0.015 | 0.015 | 1.00 | 4.15 | 0.40 | 0.40 |
Features: Alloy 601 has good resistance to heat and corrosion, especially outstanding to oxidation at elevated temperatures up to 1200℃. It also has high strength, good fabricability and good resistance to aqueous corrosion.
Applications: Chemical process industry, waste incinerators, power generation equipment, heat treating equipment, and gas turbine engine components.
Features: Alloy 625 has excellent strength at temperatures up to 816℃. At higher temperatures, its strength is generally lower than that of other solid solution strengthened alloys. Alloy 625 has good oxidation resistance at temperatures up to 980℃ and shows good resistance to aqueous corrosion, but is relatively moderate compared to other more capable corrosion resistant alloys.
Applications: Chemical process industry and sea water application. Alloy 625 is used in short term applications at temperatures up to 816℃. For long term service, it is best restricted to a maximum of 593℃, because long term exposure above 593℃ will result in significant embrittlement.
