Active Member
|
[China]
Address: No. 018, Yaojiapo Road., Jinzhou New District, Ningxiang County
Contact name:Spring Huang
Changsha Tianhe Drilling Tools and Machinery Co.,Ltd. |
|
|
BR33 Hole Blasting DTH Button Bits High Strength Alloy Steel Material
BR33 Button Bit DTH Bit For BR33 Hammer
Specification
| Matched hammer Dia. | Bit diameter | No.× Button Dia.(mm) | Air holes | Weight (kg) | Shank | ||
| mm | inch | Gauge | Front | ||||
| 3” | 90 | 3 9/16 | 7*12 | 6*11 | 2 | 4.2 | BR3/BR33/ COP32 |
| 95 | 3 3/4 | 6*14 | 4*13 | 2 | 4.5 | ||
| 102 | 4 | 6*14 | 5*13 | 2 | 5.9 | ||
1. Flat Face
This kind of face shape is suitable for hard to very hard and abrasive rock formations in applications with high air pressures. Good penetration rates an resistance to steel wash.
2. Convex Face
For high penetration rates in soft to medium-hard with low to medium air pressures. It is the most resistance to steel wash, and may reduce theload and wear on the gauge buttons, but poor hole deviation control.
3. Concave Face
The all-around application bit face specifically for medium hard and homogeneous rock formations.
Packing
