Energy saving 8-10T/H Automatic cement and sand Mortar Mixing Plant
With diesel oil or coal sand dryer
Cement and coal ash storehouse is set up outdoor. The whole system
is working almost in airtight system, and meet environmental
protection standard.
Mixing machines for dry mortar is designed based on the twin shaft
mixer with 4 air cylinder, more quick for discharge, a storage bin
and an automatic filling machine.
Dry mix mortar mixing plant is mainly composed of raw materials
storage system, lifting and conveying system, weighing system,
mixing system, packing system dust collection system and control
system.
Descriptions: It is produced by professional manufacturers, it is inorganic
binder after processing of drying and screening that can be
water-retention and thickening materials, it is use aggregate and
additives mixing as a percentage into powder mixture. It is mainly
use sand, cement, thickening powder, fly ash and additive. In
addition, it requires to add early-strength additive, fast-drying
additive and so on according to the species. It can use bulk
packing or bag packing to transport to work site, after it mix with
water as required, you can directly use it.
Plant Technical Parameters:
Mode | Capacity | Area | Height | Note |
Basic | 5-15t/h | 40-60m2 | 6-10m | Manual batching ,automatic packing |
Semi Automatic Serial | 5-15t/h | 40-80m2 | 8-12m | Automatic batching of coarse material,manual batching of additive ,automatic packing |
Full Automatic | 5-50t/h | 40-100m2 | 10-25m | Automatic batching of coarse material,manual batching of additive,automatic packing |
Twin shaft mixer mortar mixing equipment for mixing dry
mortar is composed of hoister,pre-blending silo,small silo,mixer,finished
products bin,packer,dust catcher,electrical cabinet,gas phase
balance system . It adopts double axles blade efficient mixer to
avoid breaking raw material and ensure the motar stillstand factor
constant . tile adhesive is also called pre-mixed mortar, which
made in the factory by precise batching and uniform mixing. It can
be used directly just by adding water in construction site. It has
different properties though adding different additives. The demand
for tile adhesive has increased rapidly due to its outstanding
merit compare to the mortar made in job-site.
Advantage of Twin shaft mixer mortar mixing equipment for mixing dry mortar
1. Special design for Construction Project;
2. Easy operate;
3. Convenient structures for disassembly;
4. Super property and low production cost;
5. Less space demand;
6.Full -automatic electric operation with PLC/PC control;
7.Electrical weighing system;
8.Twin shaft forced mixing system.
Type of mortar:
1. Bonding mortar: masonry mortar, wall and floor tile adhesive
mortar, pointing mortar, anchorage mortar etc.
2. Decoration mortar: plaster mortar, inner and outer wall putty,
colorful decoration mortar etc.
3. Protection mortar: water-proof mortar, anti-corrosion mortar,
self-leveling mortar, wear resistance mortar, insulation mortar,
sound absorption mortar, repair mortar, mildewproof mortar,
shielding mortar etc.
Packaging & Shipping
1)FCL: in nude for standard exporting container
2)LCL: Poly wood case
Wire cables are used for fastening the machine
Cork wood are placed in front or behind the machine to protect it.
Plastic film is covered on the machine as a rain-roof.
More than 20 years experience of dry mortar mixing plant production
and export.
Trade & Market
Main Markets | Total Revenue(%) |
---|
Eastern Asia | 20.00% |
Mid East | 12.00% |
Africa | 11.00% |
South Asia | 6.00% |
Western Europe | 6.00% |
North America | 6.00% |
Southern Europe | 6.00% |
Oceania | 6.00% |
Eastern Europe | 6.00% |
Southeast Asia | 6.00% |
South America | 5.00% |
Domestic Market | 5.00% |
Central America | 3.00% |
Northern Europe | 2.00% |
Export Percentage: | 81% - 90% | |
Export Mode: | Have Own Export License | |
No. of Employees in Trade Department: | 51-100 People |