|
[China]
Trade Verify
Address: Niheqiao Industrial Zone, Zhenglu Town, Changzhou, Jiangsu, China
Contact name:
JIANGSU ZHENXING DRYING EQUIPMENT CO., LTD |
|
Verified Suppliers
|
|
|
Description:
■XF Series Boiling Dryer consists of air filter,heater,fluidized-bed main machine,feeder,cyclone separator,
cloth bag duster,high pressure centrifuge fan and console. Because the property of raw materials is difference,
it is necessary toequip dust remover in accordance with practical needs.It can select cyclone separator
and cloth bag duster bothor one of them.In general, it needs to select cyclone separator only for raw material
that is large and cloth bag duster for the material which is powder or small andlight granule,meanwhile
there pneumatic feeding device and belt conveyor for selection.
■ Operation of this machine are continuous and intermitte type.
■ Steam,electricity or hot air furnace can be used (it can be supplied as request).
Application:
Used on medicines, chemical raw material, foodstuff, grain processing, feed and so on. For example,
raw medicine, granular tablet, Chinese tranditional medicine, health foods, drinks,maize embryo, feed,
plastic resin, citric acid and other powders. The suitable diameter of raw material is normally 0.1-0.6mm.
The most applicable diameter of raw material will be 0.5-3mm.
Advantage:
XF Series Boiling Dryer uses clean air after filtrating,through heat exchange, make air temperature rise to
a certain value into main machine, then through distributor of valve plate into fluidization, material from
feeder enter into the drier, because of wind pressure, raw material from boiling state in drier, the wide
contact between hot air and raw material, increasing the process of hot exchang, In short time,
make water vaporizing, raw material is discharged from the outlet. exhaust gas discharged from
the top of the fluidization bed, and discharged from cyclone separator, dust filter with cloth bag
after reclaiming material, The machine is working in negative pressure.
Specification:
TECHNICAL PARAMETERS
Model | XF 0.25-1 | XF 0.25-2 | XF 0.25-3 | XF 0.25-6 | XF 0.3-2 | XF 0.3-4 | XF0.3-6 | XF0.3-8 | XF0.3-10 | XF 0.4-4 | XF0.4-6 |
Technical Parameters | (XF10) | (XF20) | (XF30) | ||||||||
Area of bed layer(m2) | 0.25 | 0.5 | 1 | 1.5 | 0.6 | 1.2 | 1.8 | 2.4 | 3 | 1.6 | 2.4 |
Drying capacity (kg H2O/h) | 10~15 | 20~25 | 30~45 | 52~75 | ~30 | 42~60 | 63~90 | 84~120 | 105~150 | 56~80 | 84~120 |
Power of fan (kw) | 5.5 | 7.5 | 15 | 22 | 7.5 | 18.5 | 30 | 37 | 48 | 30 | 37 |
Temperature of inlet air (℃) | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 |
Temperature of raw material (℃) | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 |
Overall dimensions (main machine) LxWxH (m) | 1x0.6 x3.35 | 2x0.6 x3.35 | 4x0.6 x3.35 | 6x0.6 x3.35 | 2x0.70 x3.4 | 4x0.70 x3.4 | 6x0.70 x3.4 | 8x0.70 x3.4 | 10x0.7 0x3.4 | 4x1 x3.58 | 6x1 x3.58 |
Occupied area(m2) | 18 | 25 | 35 | 40 | 25 | 38 | 45 | 56 | 70 | 18 | 56 |
Model | XF0.4-8 | XF0.4-10 | XF0.4-12 | XF0.5-4 | XF0.5-6 | XF0.5-8 | XF0.5-10 | XF0.5-12 | XF0.5-14 | XF0.5-16 | XF0.5-18 |
Technical Parameters | (XF50) | ||||||||||
Area of bed layer(m2) | 3.2 | 4 | 4.8 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
Drying capacity (kg H2O/h) | 112~160 | 140~200 | 168~240 | 70~100 | 105~150 | 140~200 | 175~250 | 210~300 | 245~350 | 280~400 | 315~450 |
Power of tan(kw) | 48 | 70 | 70 | 30 | 48 | 70 | 105 | 140 | 147 | 169 | 197 |
Temperature of air in(℃) | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 | 120~140 |
Temperature of raw material (℃) | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 | 40~60 |
Overall dimensions (main machine) LxWxH(m) | 8x1 x3.58 | 10x1 x3.58 | 12x1 x3.58 | 4x1.2 x4.1 | 6x1.2 x4.1 | 8x1.2 x4.1 | 10x1.2 x4.1 | 12x1.2 x4.1 | 14x1.2 x4.1 | 16x1.2 x4.1 | 18x1.2 x 4.1 |
Occupied area(m2) | 74 | 82 | 96 | 50 | 70 | 82 | 100 | 140 | 180 | 225 | 268 |
■ Remark:
1.The feeding method has :1)Star feeding. 2). Combining star feeding and air conveyor. 3).Belt conveying. 4).Decided by customer
2.Automatic production can be realized.
3.Besides the model above mentioned,the special model can also be designed and manufactured as request.
4.According different raw material, the power of fan will be different.
Sketch of Structure
Cyclone separator and fiter Cyclone separator
