Medicinal Fluid Bed Dryer Granulator Electrically Heated Dryer Industrial

SULI drying equipment specializes in the production of Boiling granulator dryer

Working principle 

The powder granule in vessel (fluid bed) appears in the state of fluidization. Itis preheated and mixed with clean and heated air. At the same time the solution
of adhesive is sprayed into the container. It makes the particles become granulatingthat contains adhesive. Being of unceasing dry through hot air, the moisturein the granulating is evaporated. The process is carried out continuously. Finally it forms ideal, uniform and porous granules.

   Performance features
  fluidized bed is a round structure to avoid dead ends. 
  Stirring is set in the hopper to prevent the formation of channel flow when the wet material is agglomerated and dried. 
 Using tipping and unloading, it is convenient, rapid and thorough, and it can also design automatic feeding and discharging system according to requirements. 
  Sealed negative pressure operation, air flow filtered. Easy to operate, easy to clean. 
  Drying speed, temperature uniformity, each batch of drying time is generally 20-30 minutes, depending on the material.

   To adapt to the material
  mechanism screw extrusion particles, rocking particles, wet high-speed mixing granulation particles. 
  Drying of wet granules and powdered materials in the fields of medicine, food, feed, and chemical industry. 
  large particles, small pieces, sticky block granular materials. 
  Konjac and other materials that change in volume when dried.