Electric Heat Source Tea Saponin Special Spray Dryer Equipment for
High-Performance
Product Description
LPG High Speed Centrifugal Spray Dryer Product Introduction
LPG high-speed centrifugal spray dryer is a kind of dedicated
equipment for drying suspension, emulsion, paste and solution.
This spray drying machine is particularly prominent in
drying resins, polymers, dyes, pigments, glass,
rust remover, ceramics, pesticides, carbohydrate,
detergents, fertilizer, dairy products, organic compounds
and inorganic compound liquids.
Fishmeal spray dryer machine Working principle
Air is filtered and heated into the air distributor at the top of
the dryer. The hot air spirally enters the drying chamber. The feed
solution is passed through the high-speed centrifugal atomizer at
the top of the tower body, and (rotated) is sprayed into very fine
mist-like liquid beads, which can be dried in a short time in the
cocurrent contact with hot air. The finished product is
continuously output from the bottom of the drying tower and the
cyclone separator, and the exhaust gas is exhausted by the fan.
Fishmeal spray dryer equipment Performance characteristics
Drying speed is fast, the surface area of material liquid is
greatly increased after atomization. In the hot air current,
95%-98% of water can be evaporated instantaneously, and the drying
time is only a few seconds. It is especially suitable for the
drying of heat-sensitive materials.
The product has good uniformity, fluidity and solubility,
and the product has high purity and good quality.
The production process is simplified and the operation and
control are convenient. For liquids with a moisture content of
40-60% (up to 90% for special materials), the liquid can be dried
once into a powdered product, without crushing and screening after
drying, which reduces production processes and improves product
purity. The product particle size, bulk density and moisture
content can be adjusted within a certain range by changing the
operating conditions, and the control and management are very
convenient.
Fishmeal spray drying equipment Adaptable materials
Chemical industry: Sodium fluoride (potassium), basic dye
pigments, dye intermediates, compound fertilizers, formaldehyde
silicic acid, catalysts, sulfuric acid agents, amino acids, white
carbon, etc.
Plastic resin: AB, ABS emulsion, urea-formaldehyde resin,
phenolic resin, adhesive (urea) formaldehyde resin, polyethylene,
polyvinyl chloride and so on.
Food Industry: Fat-enriched milk powder, Taro, cocoa powder,
milk replacer, blood powder, egg white (yellow), etc.
Food and plants: oats, chicken juice, coffee, instant tea,
spices, protein, soybeans, peanut protein, hydrolysates, etc.
Sugars: Corn syrup, corn starch, glucose, pectin, maltose,
potassium sorbate, etc.
Ceramics: Alumina, tile materials, magnesium oxide, talcum
powder, etc.
Ordering Information
material liquid name, physical properties: solid content (or
water content), viscosity, surface tension, PH value.
Powder capacity after drying, allowable residual water
content, particle size, maximum allowable temperature.
Production, daily opening hours.
Available energy: steam pressure available, capacity,
available for coal, oil, gas.
Control requirements: whether the inlet and outlet
temperatures need to be controlled.
Powder collection requirements: Whether or not to install a
bag trap, the environment requires exhaust emissions.
other special requirements.
Technical specifications
Model / Item / Parameter | 5 | 25 | 50 | 150 | 200-2000 |
Inlet temperature | 140-350 Automatic Control |
output temperature | 80-90 |
Maximum moisture evaporation (kg/h) | 5 | 25 | 50 | 150 | 200-2000 |
Centrifugal spray head drive form | Compressed air drive | Mechanical transmission |
Maximum speed (rpm) | 25000 | 18000 | 18000 | 15000 | 8000-15000 |
Spray disk diameter (mm) | 50 | 120 | 120 | 150 | 180-240 |
Heat source | Electricity | Steam + electricity | Steam + Electric, Fuel, Gas, Hot Air Furnace |
Electric heating maximum power (kw) | 9 | 36 | 72 | 99 | |
Dimensions (length × width × height) (m) | 1.8×0.93×2.2 | 3×2.7×4.26 | 3.5×3.5×4.8 | 5.5×4×7 | According to the actual situation |
Dry powder recovery (%) | ≥95 |
Note: The amount of water evaporation is related to the
characteristics of the material and the hot air inlet and outlet
temperatures. When the outlet temperature is 90 o C,
the water evaporation curve is shown in the above figure (for
selection reference). As the product is continuously updated, the
relevant parameters are changed without prior notice.
Technical specifications
size | A | B | C | D | E1 | E2 | F | G | H | I |
LPG-25 | 1290 | 3410 | 4260 | 1800 | 1200 | 1200 | 1,000 | 1700 | 1300 | 1550 |
LPG-50 | 1730 | 4245 | 5100 | 2133 | 1640 | 1640 | 1250 | 1750 | 1800 | 1600 |
LPG-100 | 2500 | 5300 | 6000 | 2560 | 2100 | 2100 | 1750 | 1930 | 2600 | 1780 |
LPG-150 | 2800 | 6000 | 7000 | 2860 | 2180 | 2180 | 1970 | 2080 | 3050 | 1960 |
LPG-200 | 2800 | 6600 | 7300 | 3200 | 2300 | 2300 | 2210 | 2250 | 3050 | 2100 |
LPG-300 | 2800 | 8000 | 8700 | 3700 | 2800 | 2800 | 2520 | 2400 | 3040 | 2250 |