BH Mortar Industrial Co., Ltd. |
|
Light grey mortar mix production line automatic dry mortar plant
Description:
The annual output of automatic dry powder production line mainly
consists of high-efficiency mixing system, storage system,
conveying system, lifting system, weighing system, mixing system,
packaging system, dust removal system, material level control
system, alarm system, air pressure system, and complete machine.
Control system and other components.
The automatic dry powder production line generally uses 3-6 raw
material tanks, which need to be lifted into small tanks using a
bucket elevator. The clever material distribution system supports a
bucket elevator distribution operation, thus avoiding waste of
resources. Under the cooperation of the measuring screw, the
metering system introduces the raw materials in the silo into the
measuring bin, and realizes the raw material metering through the
data feedback of the sensor. The metered material is guided into
the main bucket lifter through the screw conveyor and lifted to the
upper part of the mixer to be mixed. The mixing chamber is a
pneumatic large opening type, and the material to be mixed can be
quickly put into a gravity-free mixing machine to realize
continuous production of dry powder.
The automatic dry powder production line uses a two-axis
gravity-free mixer with a very fast mixing speed. Under normal
conditions, the mixing is uniform in 8 minutes, and the production
capacity is very high. The finished product mixed in the mixer is
quickly opened to the finished silo for buffering and storage. The
finished silo and the packaging machine enter the packaging machine
through a soft connection for metering and packaging. Users with
particularly large production volumes can add belt conveyors at the
rear of the packaging machine to deliver the finished product
directly to the finished area or truck.
The automatic dry powder production line of such automatic batching has simple design, small land occupation, small investment, quick effect, continuous production and high output. The double-shaft paddle-free gravity mixer not destroys the original state of the material, ensuring that the coefficient of the dry powder is not reduced due to the shape damage of the heat-insulating material, ensuring the quality of the product. It is suitable for the production of small and medium-sized manufacturers, and is equipped with an automatic packaging system, which shows its superiority.
Raw material of dry mortar plant:
1. Cementing material: cement, lime, plaster.
2. Aggregate: yellow sand, quartz sand, limestone, dolomite, expanded perlite etc.
3. Mineral admixture: industrial byproduct, industrial slag, fly ash, pozzolana, fine silica powder etc.
4. Water-retention and thickening material.
5. Chemical additives.
Model | Full automatic dry mortar plant |
output | 30T/H |
occupied area | 60-100m2 |
power | 60-120 kw |
mixer volume | 2m³, 3m³, 4m³ |
hight | 8-13m |
man power | 3-4 persons |
batching and packaging | automatic batching & automatic packaging |
Installation site: