|
[China]
Trade Verify
Address: No.25, Cross Building, Gaoxin 6th Road, Hi-tech Zone, Xi'an, China
Contact name:LEE
XI 'AN ZZ TOP OIL TOOLS CO.,LTD |
|
Verified Suppliers
|
|
|
Oil & Gas Well BOP Stack / Blowout Preventer For Oil & Gas Well Control
The BOP Stack is a set or group of "blowout preventers"that are found on every oil and natural gas drilling rig as well as the oil and/or natural gas well. The BOP Stack is composed of annular BOP and RAM BOP, which is mainly used to control well pressure by quick well shut in case of overflow and well kick to prevent blowout.
BOP stack is typically located below the rig floor and after the
drilling rig is removed,is at the top of the well.A set of two
ormore BOPs used to ensure pressure control of a well.
A typical stack configuration has the ram preventers on the bottom
and the annular preventers at the top.The configuration of the
stack preventers is optimized to provide maximum pressure
integrity,safety and flexibility in the event of a well control
incident.It is common to have an annular preventer or two on the
top of the stack since annulars can be closed over a wide range of
tubular sizes and the openhole,but annular preventers are typically
not rated for pressures as nigh as ram preventers
Specification of BOP Stack
| Standard | API Spec 16A |
| Operating temperature | -18deg--121deg |
| Bore size | 7 1/16"-13 5/8" |
| Top & bottom connection | Flanged, studded |
| Working pressure (psi) | 2000psi-10000psi (14 Mpa-70Mpa) |
| Material class | AA, BB, CC, DD, EE, FF |
| Working temp | L, P, R, S, T, U, V |
| Product Specification Level | PSL1, PSL2, PSL3, PSL4 |
| Performance Requirement level | PR1, PR2 |
| Pass-by bore (in) | 2-1/16, 2-9/16, 3-1/16(3-1/8), 4-1/16 |
