Active Member
|
[China]
Address: #1 Building, Hanyu golden Valley, Jingshi East Road, Jinan City, Shandong province, PRC
Contact name:Liu
Sinotechdrill International Co., Ltd |
|
|
Hydraulic DTH Drill Rig Equipped with Atlas Copco's Machine 21m Depth
Introduction:
We are a joint venture with Atlas Copco. For many years we have been insisting on quality first requirements to make products. The TDB7 inherits Atlas Copco's reliable technology and proven DTH drilling methods for reliable performance and high drilling quality.
The rig adopts a hydraulic direct control system, which is extremely simple to operate and maintain, and the number of components is effectively controlled, thereby greatly reducing the failure rate of the device and effectively improving the high reliability and maintenance convenience of the device.
Application:
Equipped with high-power and high-pressure Atlas Copco drilling machine, it has high efficiency in drilling hole. Our product--TDB7 is widely used in open mining and construction of earth work excavation, quarrying and slope processing and other drilling operations.
Form:
| Hole range | Method | Down the hole |
| Diameter | 90 - 135 mm | |
| Rod | 76 x 3000 mm | |
| Drill Depth | 21 m | |
| Rod Qty | 6 + 1 | |
| Diesel engine | Model | Cummins QSL8.9-C360 |
| Power | 264 kW / 2200rpm | |
| Torque | 1480 N.m /1400 rpm | |
| Temperature | -20℃ - 50℃ | |
| Emission | Euro III | |
| Air compressor | Model | Screw type |
| Max Pressure | 18 bar | |
| Flow | 258 l/s | |
| Travelling | Speed | 1.8 km/h 3.6 km/h |
| Traction | 100 KN | |
| Grability | 20° | |
| Ground clearance | 470 mm | |
| Amplitude | ±10° | |
| Dust-collection | Device | D45 - 140 |
| Filter area | 14 m² | |
| Filter qty | 14 | |
| Thrust beam | Stroke | 3330 mm |
| Max. Pull | 18 KN | |
| Max. Push | 1000 mm | |
| Drill arm | Arm pitching | Under 28°/up 33° |
| Arm left/right | Left25°/right25° | |
| Carriage angle | left23°/right92° | |
| Horizontal hole height | 800 - 3700 mm | |
| Rotation head | Model | A7 - 140 |
| Torque | 2000 N.m | |
| Max speed | 110 rpm | |
| DTH Hammer | 3’’ hammer | 90 - 135 mm |
| 4’’ hammer | 110 - 135 mm | |
| Dimension and weight | Dimension | 9200x2500x3200 mm |
| Weight | 14500 kg |
Features:
1: Electrical system
● Integrate SIEMENS LOGO logic controller. Simple circuit and clear cable. Both ends of the cable are marked with markers.
● Less electrical components for easy maintenance.
● Electromagnetic reversing valve, simple and convenient operation
2: Hydraulic system
● High reliability gear pump
● Easy operation direct control system
● Reasonably-arranged pipes. Marked on both ends of the pipes
● Simple design, easy maintenance, easy troubleshooting
3: Drill arm
● Single straight arm, using high-strength welded parts; motor plus chain type propulsion mechanism, steel push beam
● All actions can be seen from the cab
4: Easy Operation
Handle and button combination operation. Drilling, loading and unloading rods and other state
processes at a glance.
5: Easy maintenance
The layout of the tubing is reasonable, and each tubing in the reel is in the corresponding guide groove, avoiding mutual friction between the tubing and improving the life of the hose.
Contact
If you are interested in our water well drilling rigs, please
contact us today!
Sinotechdrill International Co.,Ltd
Contact person: Mr.Liu
Mobile/WhatsApp: 86-18612948866
Email: sale@drillrigmachine.com
