Jinzhou City Shitan Machinery Equipment CO. LTD. |
Verified Suppliers
|
|
High Speed With Hydraulic Feeding Diesel Engine Power Professional Water Well Drilling Rig Machine
Water Well Drilling Rig Machine Brief Introduction
XY-1A core drilling machine is a light type core drill rig at high speed with hydraulic feeding. XY-1A(YJ) , XY-1A-4 and XY-1A-4(YJ) are designed on the basis of XY-1A
Technical parameters
Content | Parameter | Content | Parameter | ||
Drill | Hoist | ||||
Drilling depth | 100, 180m | Max. Lifting Capacity (single rope) | 15KN | ||
Initial hole dia. | 150mm | Lifting Rotating Speed | 36, 76, 121r/min | ||
Final hole dia. | 75, 46mm | Hoisting Drum Linear Velocity (2 Levels) | 10, 20, 44, 88m/min | ||
Drill rod dia. | 42, 43mm | Drum Dia. | 140mm | ||
Angle range | 90º~75º | Wire Rope Dia. | 9.3mm | ||
Dimensions (L×W×H) | 1620×970×1560(mm) | Wire Rope Capability | 35m | ||
Weight (Without Power Unit) | 620kg | Brake Dia. | 252mm | ||
Stroke | 350mm | Brake Belt Width | 50mm | ||
Swivel Head | Oil Pump | ||||
Spindle Speed(5-Speed) | 140, 295, 470, 790, 1010 (r/min) | Model | YBC-12/125 | ||
Spindle Stroke | 450mm | Rated Presure | 12.5MPa | ||
Spindle Pull-down max. | 15KN | Displacement | 8ml/r | ||
Spindle Lifting Capacity max. | 25KN | Rated Speed | 800~2500r/min | ||
Upward Displacement Speed of Idling Vertical Spindle | 3m/min | Power (Diesel Engine or Motor) | |||
Downward Displacement Speed of Idling Vertical Spindle | 4m/min | Model (Diesel Engine) | ZS1100 | ||
Rated Power | 12.1KW | ||||
Rated Speed | 2200r/min | ||||
Model (Motor) | Y160M-4 | ||||
Rated Power | 11KW | ||||
Rated Speed | 1460r/min |
Characteristics Of Water Well Drilling Rig Machine
1. Light in weight, easy relocation.
2. Adopting traversal winch, this will overcome the fault of wire
arbitrary intertwine and quick wearing out of the winch laid in
lengthways.
3. Belt transmission is adopted for the high speed level to make
the drill soft in the uneven formation, and reduce the damage to
the components and other mechanical failure.
4. In large spindle hole.
5. With wide speed range and large torquemoment in lower speed, it
is suitable for engineering geological subterranean and water
explorations.
6. The rig is stable in relocation and firmly for position.
7. Diesel engine or 22Kw electric motor for your selection.
Drilling rig features
1.With hydraulic feeding device, elevated drilling efficiency,
reduced labor strength.
2.The rig is equipped with an upper spherical jaw holding mechanism
and hexagonal Kelly, which can be replaced without shutdown, high
efficiency, safe and reliable.
3.A hole bottom pressure gauge is mounted indicating the pressure
in order to control the status inside the hole.
4.Compact structure, small volume, lightweight, high detachability,
easy transportation and suitable for the operations in plains or
mountain areas.