Active Member
|
[China]
Contact name:Miranda
Shaanxi Aipu Solids Control Co., Ltd |
|
|
Mud mixing system will work to mixing new mud or storage depending on mud tank size. A complete mud mixing system will including mud mixing tank, mixing pump, mixing hopper, mud agitator, pipeline and valves, etc. The mud tank size and equipment model selection will be depending on mixing requirement as per jobsite. AIPU supply only mixer also with mixing pump and hoper sit on a skid for economy option.
| Rig | 350-450HP | 550-650HP(ZJ20) | 750HP(ZJ30) | 1000HP(ZJ40) | 1500HP(ZJ50) | 1500HP(ZJ50) |
| Mud Flow(m³/h) | 90 | 120 | 180 | 240 | 240 | 300 |
| Shaker Qty | 1 | 1 | 2 | 2 | 2 | 3 |
| Mud Cleaner | 1 | 1 | 1 | 1 | 1 | 1 |
| Centrifuge | 0 | 0 | 1 | 1-2 | 2 | 2 |
| Separation Size | 20 micron | 7 micron | 7 micron | 2 micron | 2 micron | 2 micron |
| Mud Tank Qty | 2 | 3 | 3 | 5 | 6 | 7 |
| Mud Tank Size | Customized | |||||
| Pipeline Arrange | Customized | |||||
1. Confirm mud mixing speed requirement. There are options for
200GPM, 500GPM, 800GPM and 1000GPM mud mixing speed. Different mud
flow will match different size of mud mixing pump and mud mixing
hopper with suitable size of pipeline.
2. Mixing mud tank size is customized but 4000x2000x2000mm, 20ft
and 40ft are 3 main popular options. Or customer can list mud tank
capacity and AIPU will supply options for mud tank size for
suggestions.
3. Mud agitator size, shaft depth, impeller size will be made as
per engineer suggestion depending on tank size and drilling mud
conditions.
4. Mixing pump will set on mixing tank skid and mixing hopper sit
on tank skid or tank top by options. Tank top can be gratings or
checker plate as per request.
The mud mixing tank normally lay at end of mud tanks stem and close
the mud chemical storage for mixing convenient. The mixing pump
suction and discharge line will connect with all clean mud storage
tank with mud pump suction line as well. The connections between
tanks are normally union for fast moving and connecting. The mud
mixing tank will keep extra valves at each connection for
convenient operation
The side plates of mud tanks are designed with corrugated and load-supporting type, which are safer and can bear more load
The system adopts a centralized electric control, being convenient for operation
With modular design and small footprint, it can be flexibly configured and installed according to the customer's requirements.
All equipment is designed with corrosion and wear resistance, with a long service life.
It is addaptable to severe drilling operating conditions, being cold-resistant, heat-resistant, explosion-proofm leakage-proof, corrodion- resistant and rain-proof
It is simple for installation and disassembly, and convenient for frequent moving along with drilling crew.
1. Drilling fluid from drill hole will feeding into shale shaker
buffer box by pipeline, the shaker can install shaker screen mesh
API 35 to API 120 to separate larger drilling cuttings. Fluids part
will drop into sand trap through mesh screen panel.
2. drilling mud from sand trap will over flow into next compartment
and vacuum degasser will suction mud to degasser and treated mud
will overflow into degasser compartment.
3. Desander feeding pump will suck mud from degasser compartment
and feed into desander cyclone for 47 – 76 micron separation.
Solids part will drop from desander nozzle and fluids over flow
into desander compartment.
4. Another will pick up mud from desander compartment and feed
desilter cyclone, solids part drop through desilter nozzle and
fluids over flow into desilter compartment.
5. Submersible slurry pump or screw pump then transfer mud from
desilter compartment into decanter centrifuge for 2 – 7 micron
separate and clean mud flow into centrifuge compartment
6. All tanks compartment after desilter compartment we name as
clean mud, mixing pump can suction or discharge to any of the clean
mud tank for mud transfer or new mud mixing.
We focus on solids control industry over 20 years
We offer high quality products at competitive price
Shortest delivery time
Flexible payment terms
Timely after-sale service
Most of our equipment can be replaceable with international brands
