Shaanxi Aipu Solids Control Co., Ltd |
Oilfield drilling mud agitator is well used on mud tank
installation for tank agitating. AIPU is one of the famous agitator
suppliers for different options like vertical installation or
horizontal installation, worm gear or bevel gear, with coupler or
without, single impeller or double. The agitator is combined with
electrical motor, gear box, coupler, shaft, impeller and a pubic
skid. Oilfield mud agitator is typically use flame proof motors and
control panel which is higher standard for electricals compares
non-explosion proof area like horizontal directional drilling,
water well drilling and other construction drillings.
Oilfield drilling mud agitator is a very important to mix mud
inside of tank to avoid solids build up in tank corner. There are
different types of agitator depending on motor installation type,
gear box type and jobsite footprint space. There is worm gear,
bevel gear, horizontal installation and vertical installation for
options. The agitators will be required for all mud storage tank,
24 hours working is essential because solids built in tank will be
very hard to remove if without agitator. It is very important to
keep the mud active in tank and able to pump to anywhere as per
jobsite requirement.
Model | APMA5.5 | APMA7.5 | APMA11 | APMA15 |
Motor | 7.5hp | 10hp | 15hp | 20hp |
Impeller Speed | 60/70rpm or Customized | |||
Single Impeller | 850mm | 950mm | 1050mm | 1200mm |
Double Impeller | N/A | Up: 800 | Up: 850mm | Up: 950mm |
Down: 800 | Down: 850mm | Down: 950mm | ||
Ratio | 25.01:1 or Customized | |||
Shaft Length | Depends on tank size | |||
Power System | 380V/50Hz, 60Hz, 400V/50Hz, 60Hz, 415V/50Hz, 60Hz, 460V/50Hz, 60Hz, CUstomizable | |||
Remark | Starter is optional |
Oilfield drilling mud agitator options
APMA series mud Agitator with worm gearbox is one of the most popular solids control equipment, due to low cost and durable performance. If you have any interest, contact us freely. You'll get optimal solution