Shaanxi Aipu Solids Control Co., Ltd |
APMA Horizontal Mud Agitators With Worm Gear Driven By Electrical Motor Get High Comments From Customers
APMA series mud Agitator with worm gearbox is one of the most popular solids control equipment, due to its low cost and durable performance. Mud Agitator with worm gearbox.
Drilling Mud Agitator, The role of the drilling fluid stirrer is to maintain the uniformity of the drilling fluid and to suspend the solid particles, while the drilling fluid is for continuous and reliable mixing. As the reducer using worm single-stage reducer, so compact, light weight, transmission balance, low noise, transmission efficiency, stirring ability.
APMA Agitator specification
Model | APMA5.5 | APMA7.5 | APMA11 | APMA15 |
Motor | 7.5hp | 10hp | 15hp | 20hp |
Impeller Speed | 60/70rpm or Customized | |||
Single Impeller | 850mm | 950mm | 1050mm | 1200mm |
Double Impeller | N/A | Up: 800 | Up: 850mm | Up: 950mm |
Down: 800 | Down: 850mm | Down: 950mm | ||
Ratio | 25.01:1 or Customized | |||
Shaft Length | Depends on tank size | |||
Power System | 380V/50Hz, 60Hz, 400V/50Hz, 60Hz, 415V/50Hz, 60Hz, 460V/50Hz, 60Hz, CUstomizable | |||
Remark | Starter is optional |
For oil and gas drilling, there are different configurations on tanks number, tanks size, so it's not easy to confirm. But we can take a system as an example. One mud system laying with 6 tanks, and tanks size are 9mX2.2mX2.3m. The normal proposal is 3 sets of agitators per tank. But there is a shaker tank, then we deduct 1 set. So, probably we need 17 sets of the agitator. And the agitators are APM7.5 driven by a 7.5kw motor.
Yes. Some clients prefer the hydraulic drive for some specific use. Some clients prefer the stainless steel shaft and impeller. Different application and industries will request equipment much different If you have questions or demand on mud mixers, please let us know and we'll help you to get the ideal solution
Moreover, the APMA series agitator is flexible on gearbox and motor configuration. Such as worm and worm wheel reducer, helical bevel reducer. The motor certified by IEC, ATEX, and so on
Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details
You will get a free offer on an optimal solution, you will get a professional proposal very soon.
The agitator direction is not very strict because both directions
are workable, the right direction is good agitating performance but
heavier load and wrong direction will reduce load, and agitating
performance is not that good. The right direction is to press the
mud downwards instead of upwards. While the mud goes downwards, the
settled solids will be flushed up to keep a good agitating
performance.
The explosion-proof agitator is required for oil & gas drilling
sites, coal seam methane drilling, or mining. The Ex standard is
different depending on different countries' regulations and
drilling sites. The non-explosion-proof agitator is good for other
drilling sites like horizontal directional drilling, water well
drilling, micro tunneling, pilling, etc. Ex standard is a
customized part will be done as per the buyer’s request.
Features and Advantages
1. Optimized product structure, small floor area;
2. Stable operation, low noise, long service life, less damageable
parts, cost-effective;
3. Processed with high-pressure airless spraying equipment, painted
with primer, intermediate coat, and finishing coast to guarantee
the anti-corrosion effect and nice appearance;
4. Agitator shaft and impeller undergo polishing, acid pickling,
plating, hot-dip galvanizing, passivation, and fine grind, greatly
increase the service life and anticorrosion effect.