Shaanxi Aipu Solids Control Co., Ltd |
Model | Diameter | Nozzle number | Pressure | Rotation |
NJA50 | 50mm/2'' | 1~3 | 0.1~6.4Mpa (Optional) | 0~360° |
NJA80 | 80mm/3" | 1~3 | 0.1~6.4Mpa (Optional) | 0~360° |
Oil drilling mud guns on mud tanks are usually used together with mud agitator for drilling fluids control system
A mud gun is designed for use in a solids control system of a
drilling rig. It is a tool that is mainly used for mixing drilling
mud in the circulatory system and to prevent the mud from
precipitating. The structure of the equipment is simple offering
flexible operation and easy use. A mud gun is commonly used to
guard against precipitates in a solids control system. The mud gun
is installed in a mud tank.
Furthermore, it is usually used together with a mud agitator. The
mud agitator is used in the middle of the tank while the mud gun is
placed in the corner of the tank
Aipu NJQ mud gun means the drilling fluid mixing gun used in the mud system. The mud guns are fit on mud tanks. Usually, each agitator will be fit one mud gun to be partners working together. Agitators and mud guns will help to get a better mud condition.
Mud Guns are designed for submerged service in mud pits and are popular in 2", 3". Besides, 4” is available against client request. They can be a high-pressure gun or low pressure, high volume service such as in mud mixing systems employing centrifugal pumps.
All mud guns are equipped with handles and swivel joints as illustrated, permitting 360° rotation. Length should, in all instances, be specified when ordering. Here we'll introduce NJQ50 in more details
The mud gun installation way, bottom, and pivot type are more popular. Please check the below sketch for more reference. The difference in the installation will lead to different operations way. Considering convenient operation, we'll provide the mud guns mounted handle and the butterfly valve.
NJQ50 and NJQ80 difference is the pipe diameter, the valve size. All other main features and specifications are same.
In a mud system, the mud guns are agitation and transfer device of drilling mud. Between tanks or compartments. No dead corner, high efficiency. Mud guns are also referred to as mud mixing guns. They are widely used in the drilling fluids system. Process drilling mud on mud tank. They are usually operated together with a mud agitator. Almost every 3 meters will request one set gun along with an agitator. Similar to mud agitator, there is no gun fit on the shaker tank.
High quality national standard steel.
Discharge nozzles can be polyurethane and tungsten carbide alloy
material.
Flexible on the configuration of size and pressure rates.
High-quality painting job per international standard.
How to configure a drilling mud gun?
First, we need to confirm the nozzles of the mud gun. If NJQ50, the mud gun line is 2''. Then do we need 1 or 3 nozzles? Do we need to confirm do we need the normal pressure mud gun or the high-pressure mud gun? The materials and the valves will be different based on different requirements. Furthermore, the mud gun length, the mud gun height, and the connection pipe position. Finally, we confirm the mud gun quantity for a tank or for a system. Usually, we decide this according to mud agitators number
Another important factor to consider is the installation way. Some clients request the bottom type, some clients request the pivot type, while some clients prefer the nonspin type. Please tell us your detailed requirements, or you can consult the professional engineer before ordering.