Shaanxi Aipu Solids Control Co., Ltd |
3 Nozzle Carbon Steel API Rotation Drilling Mud Gun For Well drilling Mud Tank
Mud Guns are designed for submerged service in mud pits and are popular in 2", 3". Besides, 4” is available against client request. They can be high pressure gun, or low pressure, high volume service such as in mud mixing systems employing centrifugal pumps.
All mud guns are equipped with handles and swivel joints as
illustrated, permitting 360° rotation. Length should, in all
instances, be specified when ordering.
Mud guns are usually used along with agitator. That means, almost
every compartment on tank will request a mud gun. And there are
bottom type mud gun, pivot type mud gun, and non spin type mud gun.
For mud gun nozzle, there are 1 or 3 as options.
Technical parameters of APNJQ mud gun
Model | Diameter | Nozzle number | Pressure | Rotation |
APNJQ50 | 50mm/2'' | 1~3 | 0.1~6.4Mpa (Optional) | 0~360° |
APNJQ80 | 80mm/3" | 1~3 | 0.1~6.4Mpa (Optional) | 0~360°
|
High quality national standard steel.
Discharge nozzles can be polyurethane and tungsten carbide alloy
material.
Flexible on configuration of size and pressure rates.
High quality painting job per international standard.
Aipu APNJQ drilling mud gun means the drilling fluid mixing gun used in the mud system. The mud guns are fit on mud tanks. Usually, each agitator will be fit one mud gun to be partners working together. Agitators and mud guns will help to get a better mud condition.
Mud Guns are designed for submerged service in mud pits and are popular in 2", 3". Besides, 4” is available against client request. They can be high pressure gun, or low pressure, high volume service such as in mud mixing systems employing centrifugal pumps.
All mud guns are equipped with handles and swivel joints as
illustrated, permitting 360° rotation. Length should, in all
instances, be specified when ordering. Here we'll introduce NJQ50
more details
First, we need to comfirm the nozzles of mud gun. If NJQ50, the mud
gun line is 2''. Thne do we need 1 or 3 nozzles. Do we need to
confirm do we need the normal pressure mud gun or the high pressure
mud gun? The materials and the valves will be different based on
the different requirements. Furthermore, the mud gun length, the
mud gun height and the connection pipe position. Finally, we
confirm the mud gun quantity for a tank or for a system. Usually we
decide this according to mud agitators number
Another important factor to consider is the installation way. Some
clients request the bottom type, some clients request the pivot
type, while some clients prefer the non spin type. Please tell us
your detail requirements, or you can consult the professional
engineer before ordering.
In mud system, the mud guns are agitation and transfer device of drilling mud. Between tanks or compartments. No dead corner, high efficiency. Mud guns are also referred to mud mixing gun. They are widely used in drilling fluids system. Process drilling mud on mud tank. They are usually operated together with mud agitator. Almost every 3 meter will request one set gun along with agitator. Similar as mud agitator, there is no gun fit on shaker tank.
The mud guns installation way, bottom and pivot type are more popular. Please check below sketch for more reference. Difference of installation will lead different operation way. Considering convenient operation, we'll provide the mud guns mounted handle and the butterfly valve.
NJQ50 and NJQ80 difference is the pipe diameter, the valve size. All other main features and specifications are same.
For any question or demand, just feel free to contact AIPU solids. You will get a professional proposal very soon.