Shaanxi Aipu Solids Control Co., Ltd |
Aipu solids control manufactures high-quality well drilling fluid
flame ignitors.
An electronic flare gas ignition device is equipped to burn on the
oil and natural gas drilling field in case of flammable and
poisonous gas overflow while drilling and eliminate the harm to the
environment and ensure safety. It consists of a gas guiding pipe,
an ignition device, a torch, and an explosion-proof hose,
integrating high-pressure electronic ignition and gas combustion.
The flare ignition device is used to light the waste gas in the oil
and gas industry. It is connected with poor boy degasser, which
separates gas from drilling mud and vent gas to a flare ignition
device
Burn the harmful or poisonous gas by igniter will eliminate threat
to the environment and safety. Every flare ignition device will be
operated together with a mud gas separator. They will be connected
with the vent line or gas discharge line. They are widely used in
oil and gas drilling.
Besides traditional flare igniter, Aipu also manufactures ignition
device with solar panel. The battery will be charged under sun
energy. This is more environmental-friendly with green energy.
Model | Torch Diameter | Height | Voltage | Ignition voltage | Ignition frequency |
APFI20/3 | DN200 | 2.5~3.0m(Customizable) | 220V | 16Kv | 100~1000times/min |
The gas is carried by pipeline to the safe burner inlet.
Connect and turn on flare igniter current conversion and a voltage
amplifier circuit
Open the gas tank and operate the electronic igniter and ignite the
fire tube. (the first stage ignition)
Open the gas vent gate cutting, the burning fire tube will ignite
the gas. (the second stage ignition)
Turn off the gas tank and extinguish the fire tube, combustible gas
burning completely
We must prevent any damage to ignition wire during transportation,
hoisting, etc.
When installing a burner, we should be far away from fire.
The bottom of the burner must be fixed firmly if required by the
guy rope
Flare ignition devices should be placed in a good environment to
protect the electronic components and ensure good performance.
A flare ignition device is usually combined with a mud gas
separator in a drilling mud system.
Flare Ignition Device of blown down fuel gas designed and
manufactured by our company is a kind of handling arrangement used
in blown down natural gas, the tail gas from collecting and
distributing station of natural gas and from the refinery. And
being a kind of security and environmental protection equipment,
the flare ignition device can be used to have the blown down
harmful gas ignited and burned to prevent the environment and
security from being endangered. The flare ignition device, apart
from being used in the refinery and gas distribution station, may
be matched with Mud Gas Separator. And now, as a matured product it
has been extensively used in petroleum drilling engineering.
AIPU model of flare ignition device APFI20/3, AP is the short name
of AIPU.
Torch diameter on the top is 200mm, stainless material, well
welding between stainless and carbon steel material.
The burner height is 3 meters including the torch on top, there is
a back valve installed on the bottom of the gas inlet to avoid gas
flow back for safety purposes.
There is a control panel that can be moved by hand, and a junction
box installed on the flare ignition device with a high standard of
explosion-proof and protection standards.
The color of the ignitor can be customized. The standard is red for
a warning color.
The flare ignition device is used to light the waste gas in the oil
and gas industry. It is connected with poor boy degasser, which
separates gas from drilling mud and vent gas to flare ignition
device
The flare igition device is used to light the waste gas in the oil
and gas industry. It is connected with poor boy degasser, which
separates gas from drilling mud and vent gas to flare ignition -
device
Burn the harmful or poisonous gas by ignitor will eliminate
threats to environment and safety. Every flare ignitor will be
operated together with mud gas separator. They will be connected
with the vent line or gas discharge line. They are widely used in
oil and gas drilling.
Besides traditional flare ignitor, Aipu also manufactures the
ignition device with a solar panel. The battery will be charged
under sun energy. This is more environmental-friendly with green
energy.
For each flare ignition device, we’ll configure the burner, the
control panel, the joint connection, a small tank with LNG. Between
the ignitor and the fuel line, there is a flame arrestor ensure the
safety during ignitor operation
And now, as a matured product it has been extensively used in
petroleum drilling engineering.
Based on the installation way, there are vertical type and
horizontal type. That means the torch port direction is parallel to
the ground or normal to the ground.
Based on the fuel material, there are LNG flare ignition device or
the diesel flare ignitor. Considering the power supply, there are
the electrical gas flame and the solar gas flame.
There are the fixed control panel and the remote control gas flame.
Besides the above division, we can customize the gas flame
according to the user and the practical working condition. Such as
we made the extra-high gas flame for an oil drilling company. The
overall height is about 5m.
For any question or demand, please feel free to contact AIPU
solids. We will provide you with professional technical
solutions