Oilfield Strengthen Ground Oil Drilling Carbon Steel Rig Mats

Oil drilling rig mattings made of steel and wood for oilfield strengthen ground

Drilling rig mattings at AIPU Solids are made of high quality carbon steel beam and the larch wood or the conifer wood. And for almost of wood, there is anti0-corrosion process. Or we process it before inserting into steel frame or after.

Why do we need drilling rig mattings?

We know well drilling is outdoor activity. Many drilling site place condition varies from each other. The drilling rig mattings can help us to get a relative flat ground. Rig matting board can be new round or platform. We can put the rig and solids control system on it for safe condition. According to general area of drilling sites we can divide the mats into many smaller pieces. For example, the total area request mats is about 300m². We can use mats sized about 2x1.5m or 2x3m. And according to loading requirements, we confirm steel beam size and the wood beam size.

And the rig mattings can help much on the safe working condition. If the ground evenness is not good the rigs or even other equipment/unit will fall down. For some ground soft, the rig mat board will provide the strengthen support.

What is the structure of the rig mattings?

There are wood beams, the steel beams, the mounting bolts and other auxiliary parts. Such as the loading log or ring, the strengthen rod at 2 ends. Usually we'll use the H beam since the H beam is more even and easy to fabricate whole rig mattings. The beams of wood should be insterted into the steel frame made of H beam. 

Wood beam can be the larch or the conifer. But they both should be processed as the cuboid beam. And all of the beams used for rig mattings will be treated for the anti-corrosion effect. This will help to get a strong support and a safe working condition. How to confirm the rig matting size? Based on the general area of our working site. Then try to divide all of the rigs evenly with same size rig mats.

Why use AIPU Rig mat board?

We have the sufficient experience of rig mat board manufacture. We know how to satisfy the users completely and properly

All rig mats produced by Aipu solids control will be qualified and reliable. We do followings to give users confidence.

1. The raw material. Including the steel and the wood. Selected strictly according to executive code.
2. Wood will be processed under anti-corrosion procedure
3. We do the inspection and all process step by step to ensure users high performance products.
4. Painting the rig mats with famous brand marine coating oil, which is high anti-corrosive.
5. Custom built size and design as per clients' demand.

Aipu can produce rig mattings according to clients' certain requirements. Any demand? Please let us know

We have to emphasize, all of the screens replacement for famous brand NOV, , SWACO is just the replacement and we don't have any relationship with the original brand manufacturer.

Technical specification of APRM rig mats

Please check below technical specifications for your reference. And some configuration is customizable. Please contact us for more details

For any question or demand, please feel free to contact AIPU solids. You will get a free offer on an optimal solution, you will get a professional proposal very soon.