Home Companies Shaanxi Aipu Solids Control Co., Ltd

High Performance 360m³/H Polyurethane Hydrocycle Cones Drilling Mud Desander

Shaanxi Aipu Solids Control Co., Ltd
Active Member

Contact Us

[China] country

Contact name:Miranda

Inquir Now

Shaanxi Aipu Solids Control Co., Ltd

High Performance 360m³/H Polyurethane Hydrocycle Cones Drilling Mud Desander

Country/Region china
InquireNow

Product Details

High Quality Polyurethane Hydrocycle Cones Desander Unit

 

Solids control process drilling mud desander is the sencond phase equipment in solids control system. It's similar as mud cleaner. There are many different configurations. Such as cones quantity, bottom shaker, electrical system, and so on

 

Desander is a combination of shaker, desander cone. We call it desander, or hydrocyclone desander, or desander separator. For oil drilling mud process, desander cone is sized 8-12''. Different size cones hold different treating capacity. Before we confirm the configuration or design on mud desander, we should consider the flow rate of all cones. For example, 10" cone capacity is about 90-120m³/h and we request 240m³/h flow rate then we need 2 desander cones at least. 

 

Hydrocycle cones of desander unit

 

Cones on APCS Desanders are all high quality polyurethane. Such cones are durable and anti-corrosive, oil-resistant, high temperature-resistant. They are very suitable for drilling fluids process. For some clients, they prefer flexible capacity adjustment during operation so we'll install ball valves on the cones inlet line. And we can configure 3 desander cone sized 10'', or 2 desander cons sized 12''. For much larger capacity, we can use 3 desander cone sized 12''. Moreover, some clients prefer the casting iron desander cone. According to the actual demand and condition, we'll make desander to satisfy both clients and working condition.

 

Technical specification

 

ModelAPCS
Flow rate60-360m³/h
Bottom shakerHunter-Mini, Hunter-D or Hunter-M
Screen1~4 panels
Desander coneCustomizable
Desilter coneCustomizable
Separation point47~74microns
Vibration modeLinear or BEM, customizable
Vibration motor0.75x1~1.89kw x 2
ColorCustomizable
Electrically system380V/400V/415V/440V/460V/480V/600V/660V
Cone flow rate8'' capacity is 30-35m³/h, 10'' is 90-120m³/h

 

How does desander unit work?

 

Drilling mud is transferred to cones by centrifugal pump from the shaker tank. Desander cone is fed by desander pump with fluids below shaker Under pump pressure the fluids run into cones and flow with centrifugal force. Then the heavy particlas will deposit down and pushed out of cone drop in Apex. Particles larger than 47 microns will be separated out of drilling mud.

 

After APCS desander processing, the cuttings finer than 47 microns will flow with fluids through outlet line on desander. The drilling mud with solids spray out of cones drop down to bottom shaker. Under vibration and filtration, the solids will be more dry and save much fluids for well drilling.The cleaned mud is to be transferred to desilter cone. However, some desander are designed without bottom shaker, the drilling mud with solids will flow out of desander on slide channel directly.

 

 

Bottom shaker of desander unit

 

For drilling mud desander, the bottom shaker is a flexible configuration, too. It can be Hunter-D series, or Hunter-M, or Hunter-Mini. And the screen panels can be 2, 3, or 4, even 5. For some clients' preference on dual motion, it can be made as dual motion desander, too. 

 

Actually, the bottom shaker under desander cone is used to dry fluids out of cone. So, the mesh size is rather high and the capacity is enough for discharge from cone but not same as previous shaker

 

Features of desander unit

 

  • 100% Polyurethane ( PU ) material to make desander cones for a longer lifespan.
  • Clamp type for easy maintenance.
  • Compact design with small footprint.
  • Flexible options for 1,2 or 3 pieces of 8" or 10" cones for different capacities.
  • Flexible fast connection is available for user assembly.

 


 

For any interest or questions, please feel free to contact AIPU. You will get an optimal solution, you will get professional proposal in time.

 

 

 

 

 

 

Hot Products

APCN series mud desilter APCN series mud desilter is the third phase equipment in solids control ...
High quality drilling fluids solids control APCS desaner in China Solids control process drilling ...
APCN series mud desilter APCN series mud desilter is the third phase equipment in solids control ...
Hunter series Hydrocyclone Mud Cleaners Hunter mud cleaner uses a two-stage separation process for ...
High Quality Polyurethane Hydrocycle Cones Desander Unit Solids control process drilling mud ...
Well Drilling Mud Process Hunter Series Mud Cleaner At Aipu Solids Control CBM exploration drilling ...