Shaanxi Aipu Solids Control Co., Ltd |
Similar desilter the desander is part of the solid control equipment on the drilling equipment. It is a hydrocyclone, whose main function is to remove 50 to 70 microns particle size sand. Desander installation position at the top of the pool of mud, the shale shaker, and after the deaerator, until desilter. All solids not removed by the shale sieve desander removed. Desander no moving parts, it is possible to remove sand and mud from the drilling fluid by centrifugal force on the desander.
Model | APCS120/240/360 | APCS120/240-M | APCS240/360-D3 | APCS240/360-MG4 | |
Capacity (m³/h) | 120/240/360 | 120/240 | 240/360 | 240/360 | |
Desander Cone | 10" | ||||
Cone Qty | 1 Pcs/2 Pcs/3 Pcs | ||||
Working Pressure | 0.25-0.4Mpa | ||||
Separation Point | 47-76 Microns | ||||
Inlet | 6" | ||||
Outlet | 8" | ||||
Bottom Shaker | Model | N/A | Hunter Mini | Hunter D3 | Hunter MG4 |
Vibration Mode | Linear Motion | ||||
Vibrator Motor | 2×0.75Kw | 2×1.72Kw | 2×1.72Kw | ||
G Force | ≤7.5G | ||||
Deck Angle | 2° | -1 - +5° | |||
Screen Area | 1.35㎡ | 2.27㎡ | 2.73㎡ | ||
Screen Panel | 2 Pcs | 3 Pcs | 4 Pcs | ||
Dimension (mm) | 2150×1000×1900 | 1680×1760×1850 | 2400×2000×2200 | 2640×2100×2200 | |
Weight (Kg) | 450/500/550 | 1050/1140kg | 1800/1890 | 1900/1990 |
Desander and sand drilling fluid is a piece of important solid control equipment. The second stage is mainly used for drilling fluid purification. It removes harmful solid, stable performance of the drilling fluid and improved drilling efficiency. Desander hydrocyclones are made of cast iron. It is reliable, efficient, and long service life. Sand content after grit removal control 0.15% or less. Based on API RP 13C, with use the official API Monogram Certificate of Authorization.
Aipu's Desander is an economical and practical desanding device. It is used as the second stage of the solids control system, separates solid particles' next stage equipment.