200t Beam Launcher Bridge Erection Crane Equipment To Move Girder
Product Description
200t Beam Launcher Bridge Erection Crane Equipment To Move Girder
is a kind of steel structure prefabricated beam hoisting erection
equipment with wide working range, good performance, easy operation
and safe structure. Main structural features the main beam adopts
the four-sided truss structure, which is made of sections and steel
plates welded together. It is suitable for highway construction in
mountainous area and can meet the requirements of large slope,
small radius curved bridge, 45 degree inclined bridge and bridge
erection at tunnel mouth. Similarly, it is more convenient in the
plain where the construction conditions are good. This product is
used in -20℃- 40℃, no fire and no corrosive medium environment.
Product Advantages
- Novel in form and reasonable in structure, the machine has fully
considered the construction characteristics of modern Bridges in
the design, so that the machine has a wider adaptability;
- The whole machine is light in weight and high in stiffness. Finite
element analysis and calculation are adopted in the design of the
machine to optimize the structure, so that the weight of the whole
machine can be reduced by 20%-30% compared with similar models.
- 200t Beam Launcher Bridge Erection Crane Equipment To Move Girder
adopts the form of guide beam, which greatly reduces the cantilever
deflection of the front end of the bridge erecting machine and is
more suitable for erecting the upper and lower slope Bridges;
- The middle leg does not walk on the bridge deck, so there is no
need to lay the longitudinal track of the bridge erecting machine.
At the same time, the pressure of the bridge erecting machine on
the bridge deck is reduced.
- Transport beam flat car participate in the bridge erecting machine
walk, become a part of the bridge erecting machine, the bridge
erecting machine rent, so that the overall length of the bridge
erecting machine reduce, bridge erecting machine has greater
adaptability to curved bridge;
- The position of the front and middle legs of the bridge erecting
machine can be adjusted at will. The position of the front and
middle legs of the bridge erecting machine can be adjusted
according to the Angle of the oblique bridge when erecting the
bridge;
- The side beam is in place once and the trolley is moved
horizontally. The whole machine carries the side beam to be in
place once and solves the installation problem of the side beam.
- The main beam and main connection structure of the whole machine
adopt pin shaft connection, which is convenient for installation
and disassembly
Package & Delivery