Active Member
|
[China]
Address: NO11,Changchun Road, Hi-tech Zone Zhengzhou,China
Contact name:doritdental
Henan Dorit Biotechnology Co., Ltd. |
|
|
High Speed Dental Handpiece Turbine DORIT LED
High Speed Handpiece
High Speed Handpiece Features:
The DORIT LED high speed handpiece & swivel with inbuilt generator creates LED light in the mouth.
Simple FG bur changing
Precision bur cooling – triple coolant spray produces a mist around the bur.
Patented hygienic head – Prevents aerosol particles from being sucked into the turbine.
1 year warranty.
High Speed Handpiece Tech data:
| Name | Dental E-generator handpiece |
| Drive air pressure | 0.25-0.3Mpa |
| Water Spray | 3 Water Spray |
| Water pressure | 0.2Mpa |
| Water pressure | 198Kpa(2kg) |
| Light brightness | 25500lux |
| Power | 22W |
| Handpiece Hole | 4Holes/2Holes |
| Rotation speed | 350,000~420,000rpm |
| Head height | 13.0mm |
| Head diameter | Φ11mm |
| Illuminate | LED Light (white light) |
| Chuck type | Push button |
| Clamping force | 22N~34N |
| Torque force | 0.1N·cm(small head); ≥0.1N·cm(large head) |
| Bur Applicable | Φ1.59mm-Φ1.60mm*21mm-23mm(diameter*length) |
| Noise | ≤60DB |
High Speed Dental Turbine Detailed photos:
After each patient use , maintenance should be done as follows:
1. First remove the diamond burs , and clean up all the teeth on dental handpieces precipitate
2. Use a metal needle to clean the spray holes and fumaroles
Note: The spray holes and diamond burs into 40 -degree angle , fumaroles and diamond burs to a 30 degree angle
3. Place the clean lubricating oil is sprayed into the axial hole 1-2 seconds ( diamond burs is plugged holes )
4. In the bottom of the handpiece were ( with / without quick connector ) two kinds of styling , make the right amount of lubricant is injected into the bottom
5. The handpiece with quick connector combination ( first determine the water switch is turned off )
6. Replace the diamond burs , surrounded by white silk cloth handpiece head ( make sure the needle does not touch the diamond burs and white gauze , so as not to tie )
7. pedal depressed for about 20 seconds , look at whether there is in white gauze on any stain. If there are stains on the white gauze , again, add oil , starting from item 4 continued routine maintenance , know that white gauze until no stain
8. Finally, no more than 135 degrees Celsius temperature and high pressure sterilization
What are we supplying?
1. High speed dental handpiece
2. Low speed dental handpiece
3. dental implant handpiece
4. Endodontic Files
5. Endo motor
6. other dental equipment
Our Services
1) We can offer OEM service.
2) We will reply your inquiry within 24 hours.
3) Our handpieces have one-year warranty and bearings have three-month warranty, except for man-made damages.
