Active Member
|
[China]
Address: Floor 4,No.31,Yangmei Road,Yangmei Community,Bantian street,Longgang District,shenzhen,China
Contact name:Liu Yu
Shenzhen Vians Electric Lock Co.,Ltd. |
|
|
DC12v 24v Single Door Electric Magnetic Lock with Signal Output for Sliding Door
Product Overview
Our 280KG/600Lbs series electric magnetic locks gain the UL certification this year. Our locks adopt international leading production equipment and packing technology, which not only makes our locks'antioxodant capacity of the surface reach the international leading level, but also helps to increase the holding force ( higher 20% than other manufacturers).
UL Series Lock Specification
| Model | Size(unit: mm) | Voltage | Current | Holding Force | Lock Signal | Door Signal |
| VI-280A/AS/DS | 250L*47W*26H | 12/24VDC | 12V/480mA 24V/240mA | 280kg(600Lbs) | No/Yes/Yes | No/No/Yes |
| VI-280B/BS/DS | 500L*47W*26H | 12/24VDC | 12V/480mA*2 24V/240mA*2 | 280kg*2(600Lbs*2) | No/Yes/Yes | No/No/Yes |
| VI-500A/AS/DS | 265L*71W*40H | 12/24VDC | 12V/480mA 24V/240mA | 500kg(1200Lbs) | No/Yes/Yes | No/No/Yes |
| VI-500B/BS/DS | 530L*71W*40H | 12/24VDC | 12V/480mA*2 24V/240mA*2 | 500kg*2(1200Lbs*2) | No/Yes/Yes | No/No/Yes |
Standard Mounting Method
1．Use the supplied template to determine the correct location and size of mounting holes for both the door and frame header. Ensure that the door opens away from the Maglock. In the case of a single door, the Maglock is positioned as close as possible to the vertical section of the door jamb.Drill door and frame as indicated.
2．Loosely install the mounting plate using two of the supplied
Philips head mounting screws in the elongated slots. Attach the
Maglock to the mounting plate.
3．Using a hammer, lightly tap both roll pins into the armature plate until they are secure.
4．Before installing the Hexnut, the hole in the door may need to be
drilled or tapped. Refer to page 2 for this information. Using the
componets shown in the image to the right, mount the armature to
the door. Make sure that the armature plate is not over tightened
and that it is installed as shown in the following diagram. The
armature plate must be free to self align with the door.
5．Ensure the armature and magnet are aligned. Adjust the mounting
plate to suit and then drill the appropriate sized holes in the
door header for the remaining attachment screws.
6. Close the door to test holding force. The angle between armature plate and magnetic lock can be adjusted by adding or reducing washers.
Why choose us
<1> Low MOQ and free sample
1.We can accept MOQ from 1pcs
2.For low price products below 2$,we can provide free sample.
<2> OEM amd ODM
1.OEM: 1)Silk print logo on the goods
2)Firmware customization
3)Customized Color box
2.ODM: For products or functions we don’t have, we can customize for you.Make your ideas come ture.
<3> Good Quality Products
1.All products will have been strictly quanlity checked in house before packing.
2.All products will be well packing before shipping.
3.All our products have 1 year warranty,the products will befree for maintenance.
<4> Excellent Service
1.All inquiries will be replied with in 24 hours.
2.We welcome accept trade assurance orders.
3.With the professional team,we can provide efficient support all of time.
Remarks
1. The delivery place: ShenZhen.
2. OEM approved, but the price is different.
3. Payment term: T/T, pay 100% sample fee, prepay 30% after samples confirmed, finish 70% before delivery.
4. All our products enjoy one year replacement, three years warranty, five years free of labour charges maintenance service, if the damage is not caused by human
