Home Companies Oky Newstar Technology Co., Ltd

PCB Arduino Led Matrix , Multiple Cascaded 16MHZ PWM 8 X 8 Rgb Led Matrix Panel

Active Member

Contact Us

[China]

Address: Room1105, Block B, Chinto Technology Building, Minzhi Road, LongHua, ShenZhen city, GuangDong province, China

Contact name:Amy

Country/Region	china
City & Province	shenzhen guangdong

8x8 LED RGB Matrix Module Driver Board Dot Matrix Not Included for Arduino AVR

Description
porduct name	8x8 LED RGB Matrix Module Driver Board Dot Matrix Not Included for Arduino AVR
specifications	6bit color support ; Support for hardware 16MHZ PWM No external circuitry Dedicated GPIO and ADC Interface Support for hardware URAT and IIC communication 24 -channel constant current channel current up to 100mA per channel 8 -channel constant current source driver current up to 500mA per channel Power supply : +5 V to +5.3 V. Current : Max 300mA. Operating temperature range : -10 °C ~ +50 °C Hardware Features Support for multiple cascaded without hardware setup. RGB color display and supports three kinds of mixed colors. Dot sequence using Cartesian coordinate system , easy to understand. Ardu development board supporting separate power supply or an external power supply When multiple cascading use , if the color is too dark , the supply voltage can be increased to about 5.2v. Do not exceed 5.4V. When multiple cascading , all data lines connected to the 1st sub- board. ( The origin ( 0,0 ) where the sub-board for the 1st sub-board )
Competitive Advantages	1. Convenient & Friendly Customer Service.
	2. Low Prices Direct From Factory Suppliers.
	3. Fast Delivery Around the World.
	4. High Quality With Global Standards.
	5. 1 Year Factory Warranty.
	6. Safe Shipping Way and Payment
Warm Note	Welcome ODM/OEM orders we are professional to improve, design,process,manufacture products according to your requirement .

Photos:

Our Team:

FAQ:

1. What is the delivery time?

Normally, 1-5 workdays after payment;

Special requirement orders, delivery time is negotiable.

2.If the products can’t work after receiving it,what should I do?

We will replace new items for you at once, and respect your final decision for wrong goods.

3.If the products don’t meet my demand after I received it,can I return it?

Yes,no problem.

You can return back to us, we will refund your full payment.

StepStick A4988 Stepper Motor Driver with Heatsink for 3D Priner orduct name A4988 RAMPS StepStick ...

StepStick A4988 Stepper Motor Driver for 3D Priner Specifications: A4988 is a complete microstepping ...

NEO M8N NEO-M8N-001 GPS Chip for APM2.6 Flight RC Control Description porduct name Endstop Travel ...

2 in 1 74HC595 Chip 8x8 Dot-Matrix Driver Module & Red LED Display Board Kit Description porduct ...

8x8 LED RGB Matrix Module Driver Board Dot Matrix Not Included for Arduino AVR Description porduct ...

8x8 LED RGB Matrix Module Driver Board Containing Dot Matrix for Arduino AVR Description porduct ...

Related Products