Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire

Hot End 3D Printer Kits , RepRap J-Head MKIV MKV Hotend Nozzle With Wire

Quick Details:

1.The J-Head Hot End can easily and well interface with the most popular RepRap extruders.

2.built-in heat-resistant teflon.

3.It won't be deformed though against high temperature.

4.It has good ventilation and fast heat dissipation.

5.The ABS and PLA filament will be conveniently put into the feeding inlet with the boot head.

6.no need to wrap nichrome wire or to bake a heater core

Desctription:

This J-Head Hot End is assembled and designed based on other nozzle. It's very simple by reducing the number of custom machined parts to a bare minimum. The J-Head Hot End can easily and well interface with the most popular RepRap extruders.

The filament path is same with teh one of an already proven design, it can be used to print reliably with both ABS and PLA. If using PLA, it requires a small fan to provide air-flow through the cooling vents milled in the sides of the nozzle holder. Besides, the Hot End has another two advantages. Heat transmission is more efficiency as there is no thermal junction where a separate heater screws onto the nozzle. And a resistor is used as a heater. There is no need to wrap nichrome wire or to bake a heater core.

Specification:

Optional Nozzle:0.3mm/0.35mm/0.4mm/0.5mm

With 70cm cables

Feeding inlet diameter:3mm and 1.75mm ABS and PLA filament

Factory Pictures

Competitive Advantages:

1. Convenient & Friendly Customer Service.

2. Low Prices Direct From Factory Suppliers.
3. Fast Delivery Around the World.
4. High Quality With Global Standards.
5. 1 Year Factory Warranty.
6. Safe Shipping Way and Payment.