|
[China]
Trade Verify
Address: Room 502, Unit 2, Building 1, Yi Cui yuan i city, No. 11, Tangyan South Road, Yanta District, Xi'an city, Shaanxi Province, China.
Contact name:Wang
Xi'an Desun Uniwill Electronic Technology Co., Ltd. |
|
Verified Suppliers
|
|
|
DS2100 Portable Multi Parameters Water Quality Analyzer Ph EC Turbidity DO Monitoring Sensor Probe IP68
Our company has launched the latest online multi-parameter (all-in-one) water quality sensor with integrated design, which is reliable and easy to use. A maximum of 6 digital sensors can be connected at the same time. Fluorescent dissolved oxygen sensor, four- electrode conductivity sensor, turbidity sensor, digital pH electrode, blue-green algae and chlorophyll sensor can be selected at the same time. RS485 output, equipped with automatic cleaning device, greatly reducing maintenance costs, each sensor is equipped with quick-plug waterproof connector. Compared with traditional shore-type meters, installation is more convenient and can more directly reflect the real data on the spot.
² Digital sensor, RS485 output, support MODBUS
² All calibration parameters are stored in the sensor, and each probe has a waterproof connector for easy insertion and removal.
² Equipped with automatic cleaning device, it can effectively remove the surface contamination of the sensor, prevent the growth of microorganisms, more accurate and lower maintenance.
² Alternatively luminescent dissolved oxygen, four-electrode conductivity, optical turbidity, the pH digital, digital ORP, chlorophyll , oil in water and ammonia nitrogen
² Sensor for long-term online monitoring.
² The all-in-one design allows for the simultaneous connection of six probes and seven parameters.
Production Name | Specifications | ||
Optical dissolved oxygen probe | Range | 0-20mg/L or 0-200% saturation | |
Precision | ±0.3mg/L | ||
Resolution | 0.01mg/L | ||
Range | 0~1000 NTU | ||
Precision | <5% or 0.3NTU | ||
Resolution | 0.1NTU | ||
Range | 1uS/cm-200mS/cm | 1uS/cm-100mS/cm | |
Precision | 1% FS | ||
Resolution | 0-1000uS/cm: 0.1uS/cm; 1mS/cm-100mS/cm: 0.1mS/cm | ||
Range | 0~400 ug/L or 0~100RF | ||
The detection limit | 0.1 μg/L | ||
Resolution | 0.1 μg/L or 0.1% RFU | ||
Digital pH probe | Range | 0-14pH | |
Precision | ±0.1pH | ||
Resolution | 0.01 | ||
Digital ORP probe | Range | -999~999mV | |
Precision | ±20mV | ||
Resolution | 1mV | ||
Oil in water water | Range | 0-20ppm or 0-50ppm | |
Precision | 1% | ||
Resolution | 0.1ppm | ||
Ammonia nitrogen probe | Range | 0~1000mg/L | |
Precision | ±10% | ||
Resolution | 0.1mg/L | ||
other information | Operating temperature | 0~50°C | |
Output | RS485 | ||
Automatic cleaning brush | Yes / Optional | ||
powered by | 12Vdc±5% | ||
Current | 100mA | ||
Protection level | IP68 | ||
Cable length | 10m, 5m, 15m and 30 | ||
| Name | Description |
| Online parameter (all-in-one) water quality sensor | Includes fluorescent dissolved oxygen, four- electrode conductivity, turbidity, digital pH, temperature, and self-cleaning brushes. 12V power supply, IP68 waterproof. 1 RS485 output. |
| On-line multi-probe fluorescence dissolved oxygen sensor | Range 0 ~ 20mg / L or 0 ~ 200% saturation, 485 interface, waterproof connector, IP68 |
| On-line multi-probe four-electrode conductivity sensor | Range: 1μs / cm ~ 200ms / cm, accuracy: <1%, electrode material: nickel, sheath material: PEEK, operating temperature: 0 ~ 50 ℃, 485 interface , Waterproof connector, IP68 |
| On-line multi-probe flat head sensor turbidity | Optical fiber turbidity, range: 0.1 ~ 1000NTU, accuracy: <5% or 0.3NTU, response time: <2 sec, sheath material: 316L, operating temperature: 0 ~ 50 ℃, 485 interface, waterproof connector, IP68 |
| Online multi-probe digital pH sensor | Online industrial pH electrode, RS485 output, 0-12, waterproof connector, IP68 |
| Online multi-probe automatic cleaning brush | Automatic cleaning brush kit, including motor brush and positioning device, 2 sets of parts, waterproof connector, IP68 |
| Multi-probe sonde | Can be connected to pH, four-electrode conductivity, optical dissolved oxygen, turbidity, including protective cover, 485 interface, waterproof connector, IP68 |
1. Sensor Probe size 100x381 mm(Φ xL)
2. Power information
Power supply must be DC 5-12v + / - 5%
3. Cable information
4 wire AWG-24 or AWG-26 shielding wire.
1. Red wire - power supply (VCC)
2. White line - 485 data (485 A)
3. Green line -- 485 data (485 B)
4. Black wire - ground wire (GND)
5. Bare wire - shielding layer
| Error | Possible causes | Solutions |
| The operation interface cannot be connected or the measurement results are not displayed | Controller and cable connection error | Reconnect the controller and cables |
| Cable failure | Please contact us | |
| Measured values are too high, too low, or the values remain unstable | Dirt and microorganisms on the sensor | Dirt and microorganisms on the sensor |
Quality assurance
| Warranty period | |
| Fluorescent Dissolved Oxygen Probe | One year |
| Flat head turbidity probe | One year |
| Four-electrode conductivity probe | One year |
| Digital pH probe | Three months |
| Temperature | One year |
| Multi-probe sondes | Three years |
| Other consumables | Three months |
Our company assures its first-hand buyers that there will not be any product defects caused by substandard materials or factory manufacturing in the 3 months after shipment. If a defect is found within the 3-month warranty period, Disen Hezhi Electronics promises to repair or replace the defective product or return the payment in addition to the first shipping and related formalities. Any product repaired or replaced during the warranty period will only enjoy the remaining warranty period of the original product.
This warranty does not apply to consumables such as consumable parts (including but not limited to lamps, pipes, etc.).
Contact Disen Hezhi Electronics or your agent to begin technical support during the warranty period.
After receiving the customer's questions about product quality, our company will confirm whether the product needs to be repaired within two weeks; products that have not been approved for repair cannot be returned.
This warranty does not cover the following:
● Damage caused by force majeure, natural disasters, social unrest, war (published or unpublished), terrorism, civil war, or any government coercion
● Damage caused by improper use, negligence, accident or improper application and installation
● Freight charges for shipping the goods back to Yushan Sensing Technology
● Expedited or express shipping for parts or products covered by the warranty
● Travel expenses for local warranty repairs
This warranty covers all aspects of our company's warranty regarding its products.
This warranty constitutes the final, complete and exclusive statement of the terms of the warranty, and no one or agent is authorized to formulate other warranties in the name of Disen Hezhi Electronics.
The remedies such as repair, replacement, or refund of the payment as described above are special cases that do not violate this quality guarantee. The remedies such as
Xi'an Desun Uniwill Electronic Technology Co., Ltd (Hereinafter referred to as Disen Sensing Company) is located in Xi'an High-tech Development Zone. It is a high-tech company integrating production, R&D, sales and engineering services. Relying on Xi'an's rich high-tech resources, we have carried out technical cooperation with many universities and scientific research institutions, constantly breaking through technical barriers, improving product performance, and using leading technology to provide high-quality products for the water quality monitoring industry.
We launched a wireless water quality monitoring solution based on the current rapid development of the Internet of Things technology, combining smart terminals and traditional display units through wireless transmission to achieve real-time dynamic water quality monitoring functions such as data cloud display, remote cloud control, and upper and lower limit alarms.
service
* Standardized workshop and process
* Strict professional quality inspection
* Return is supported if the product is unqualified.
* Fast delivery
* Warranty for 1 years
Q: Is your company a manufacturer??
A: Yes,we are a professional manufacturer of online water quality
monitoring products: oil in water sensor/ DO sensor/ NH4-N sensor /
ORP / COD sensor / Blue-green algae sensor /Conductivity sensor
/TDS / TSS /MLSS,ect.
Q: What parameters do you need for product selection?
A: Application, Range, Power supply and Output signal.
Q: How about the quality of the managements?
A: We have a complete quality control system, our products will be
fully pre-inspection before shipping to you. We have the
certification of ISO, CE, we could send the certification test of
our company to you.
Q: Can you offer OEM services?
A: Yes,we support OEM and ODM products according to your
requirements.
Q: What are your terms of payment and delivery time?
A: We could accept T/T, Paypal, Western Union, Credit Assurance.
Generally, we will arrange the shipment within 7 days after
received payment.
Q: How about warranty?
A: 12 months warranty
