Staff Wire Netted Revolving Chair , 122kg 270lb Ergonomic Mesh Chairs

Staff Mesh Chairs Office Revolving Chairs Ergonomic Mesh Chairs

Staff Mesh Chairs Office Revolving Chairs Ergonomic Mesh Chairs Description:

The mesh material of the backrest lets air through to your back during long sitting

periods. With a comfortable, height-adjustable seat and wheels to move you around,

you’ll be sitting pretty in an DIOUS swivel chair for years to come. You can lean back

with perfect balance, as the tilt tension mechanism has three different locking positions.
The high backrest and the curved shape of the chair, provide good lower back support

and prevent your back from getting tired. You sit comfortably and longer with a relaxed

posture.You sit comfortably since the chair is adjustable in height. Increased stability

since the tilt function is lockable when the backrest is in the upright position. The

casters are rubber coated to run smoothly on any type of floor. Relieves strain on your

arms and shoulders.This chair has been tested for office use and meets the requirements

for durability and stability set forth in the standards of BIFMA.

Staff Mesh Chairs Office Revolving Chairs Ergonomic Mesh Chairs Specifications:

Staff Mesh Chairs Office Revolving Chairs Ergonomic Mesh Chairs Advantages:

Swivel Test – Cyclic: This chair has been tested for office use and meets the requirements

for durability and stability set forth in the following standards: There shall be no loss of

serviceability after 60,000cycles of rotation (360°) at a rate between 5 and 15 rotations

per minute under a 122 kg (270 lb.) load on the seat. If the seat height is adjustable set

the height to its lowest position, for all chairs, continue the test for an additional 60,000

cycles to a total of 120,000 cycles.Tilt Mechanism Test – Cyclic: There shall be no loss

of serviceability to the tilt mechanism after 300,000cycles at a rate between 10 and 30

cycles per minute under a 109kg (240lbs.) load to the center of the seat.

Impact Test: There shall be no loss of serviceability to the chair after a test bag weighing

57kg(125lbs.) is free fell from 36 mm (1.4 in.) above the uncompressed seat to the

specified position on seat for 100,000 cycles. The drop height and/or seat height shall

be adjusted during the test if the drop height changes by more than 13 mm (0.5 in.).

The cycling device shall be set at a rate between 10 and 30 cycles per minute.

For more test details, you can turn to our BIFMA certificate.

This chair was devoloped not only for office decors, but also for home or hotel applications.

You can change the color of the mesh and fabric to suit your environment. The chair can

make you feel comfortable and relaxed. Enjoy your work, enjoy your life.