Active Member
|
[China]
Address: Room501, Unit A, No.358, Yinxi Road, Songjiang District, Shanghai, 201615
Contact name:Hurace Huang
Shanxi Guangyu Led Lighting Co.,Ltd. |
|
|
□ Housing: high-pressure die cast aluminum,first given a zinc chromate substrate, then finished in RAL7036 light grey polyester powder coating for optimum protection against harsh environments.
□ Front Glass: Toughened glass, secured within an aluminum frame.
□ Bracket: Galvanized steel, with additional locking screws.
□ LENs: Plastic.
LED Chip
SMD3030 or SMD5050, high luminous efficiency: up to 200lm
Lifespan>50,000 hours
Heat sink
Aluminum material is with fin type design for better heat dissipation
PC lens optional
Symmetrical PC lens:13 ˚ /30 ˚ /60 ˚ /90 ˚ /120˚
Rotatable bracket
Optional Rotatable bracket can be adjusted horizontal plane angle when you mounted lamp.
Power Supply
Meanwell, Moso, Sosen driver are optinal , with 5 years warranty
Professional outdoor AKESU powder
Corrosion and rusting resistance
SPD 10KV optional
IP66 waterproof
Safe and long life-span
European standard
Our lamp wire adopt European standard. Brown representative Live Wire, green representative Naught wire and yellow-green representative earth
Waterproof connectors
The power connectors on all our lamps are IP67 waterproof.
| FIXTURE POWER | LIGHTING EFFICIENCY | LUMINOUS FLUX | POWER FACTOR | BEAM ANGLE(°) | BODY DIMENSIONS | BODY WEIGHT |
| 200W | 130LM/W | 26000LM | >0.95 | 13/30/60/90/120 | 496*156*148mm | 6.3kg |
| 400W | 130LM/W | 52000LM | >0.95 | 13/30/60/90/120 | 496*326*222mm | 13.4kg |
| 600W | 130LM/W | 48000LM | >0.95 | 13/30/60/90/120 | 496*496*222mm | 22.7kg |
| 800W/1000W | 130LM/W | 130000LM | >0.95 | 13/30/60/90/120 | 496*666*222mm | 29.2kg |
INSTALLATION:
1.Fixed the lamp bracket to the mounting position, as shown figure
2.Connect the input wire to the wire connector, as shown figure2;
3.Adjust the lamp Angle to the right position:
a. Screw off the butterfly nut, remove the bolt, then the u-bracket
will rotate easily.
b. Adjust the light projection direction to the suitable position.
c. Pass the bolts through the u-bracket hole and dial hole at the
same time and tighten the butterfly nut so that the u-bracket does
not loosen, as shown figure
If there need to adjust the projection direction of a single
module, please follow these steps:
a. Remove (1) screw with a cross screwdriver;
b. Loosen the (2) screw with a hex wrench;
c. Rotate the module to the right position, Module Angle adjustment
range: -30°~30°;
d. Tighten the (1) screw and (2) screw, as shown figure 4.
4. After checking, power on.
Applications:
Applied to to workshop, industrial building, sports center, gas station, parking lots, waiting room, train station, harbor, wharf and other large energy-saving lighting.
QC
GYLED has very strict Quality Control System, from checking and evaluation of incoming materials to the delivery of products, each item will be checked and tested for several times.
MOQ: 1 CARTON
Maintenance:
1, Cut off power.
2, Remove male and female connectors or power supply wires that need to be replaced, remove the screws.
3, Replacing with new components.
4, Re-tighten Replacement, connect the male and female connectors and wires of power supply.
5, Lock up the screws.
6, Repairs completed.
Advantage of FLOOD LIGHT:
SAVE ENERGY
Replace your incandescent or flu
Certificates
After several years endeavour and development, concentrating on innovative spirit, GYLED established a professional management team. The company is guided and operated according to requirements from management systems of ISO9000,ISO14001 and OHSAS18001, and with introducing ERP IMS (information Management System),management decision becomes more scientific and efficient. We will also continuously optimize management system, provide excellent platform and ensure our every employee to create value for users.
ABOUT US
We, Shanxi Guangyu LED Lighting Co.,Ltd, established in 1988, is a professional LED lighting products manufacturer in Shanxi province of China. Our Sales office and R&D center both are in Shanghai. GYLED is your provider of premier quality LED lighting products and solutions. Our main products are LED Industrial Highbay lights, LED Flood Area lights, LED Streetlights. With our long-term great efforts, our products comply with CE, RoHS, ERP, GS, SAA, UL, cUL and CCC certificates. We aim at focusing on the best products with high quality and low cost.
Professional Packaging
• Foam Protection to Withstand Harsh Transportation and Impact
• Carton and Pallet with Foam and Cling Wrap to Withstand Impact, High Humidity in Containers, and Rainy Weather
• To Guarantee an Intact Condition when Receiving the Goods
Shipment
1. DHL(a big discount)
2. TNT/FedEx/UPS
3. DHL Airway express. About 3-5days you can get them by the door
of your home or office.
4. Seaway.15-25 days. It will definitely save your shipping cost
for the large order.
