DIKAI WF420 Updraft Paging machine can be equipped with ribbon
printer, ink wheel printer, heat transfer printer, jet printer and
laser printer. It contains cable-stayed alignment device that paging bags are aligned to improve the position accuracy of the code and label. The negative pressure suction device, effectively ensure that the bags after paging are conveyed
smoothly on the conveyor belt, and ensure the accurate position of spray code and labeling. And De-static device: Ionic wind can remove the static electricity on the surface of
products, effectively avoid the products adsobing together.
When carrying out maintenance and overhaul, it shall be carried out
in shutdown state.
1. Overlap occurs when paging.
Adjust the knob of the reversing wheel so that the distance between
the lowest point of the reversing wheel and the highest point of
the paging belt is the thickness of the divided material.
2. Overlap occurs during operation.
The paging wheel or the paging belt is worn during operation.
Adjust the knob of the reversing wheel clockwise until the paging
is smooth.
3. The discharge is not smooth or skewed.
When the discharging is not smooth, adjust the width of the guide
chute so that the width of the guide chute is the same as that of
the divided material.
When deflection occurs, adjusting the width of the guide chute
cannot eliminate the fault, that is, the receiving wheel on the
conveyor belt is deflected, so it is enough to correct the
receiving wheel.
4. Material jam during pagination.
Loosen the material pressing wheel or adjust the elastic force of
the material holding plate.