F-8A Gasoline Injector Tester&Cleaner for 8 cylinders

F-8A Gasoline Injector Tester&Cleaner for 8 cylinders

• Main functions
    1.Can do reverse flushing, flush-back cleaning, ultrasonic flushing, and disaffiliation-free 

      flushing to one or more fuel injectors
    2.Automatically simulate the overall process under various pulse width and engine speed. 

     The operation status of the fuel injectors can also be observed whether at acceleration 

     and deceleration.

    3.Can manually set time, pulse width and rotation speed of the fuel injector, and observe 

     the performance under varied parameters. Easy and convenience of operation.
    4.Can determine the shortest on-off cycle and the quality of the injector
    5.Can do oil circuit testing, and disaffiliation-free flushing to the engine 
  
  
  Technical Parameter
  Voltage: AC220V±10%/50HZ
  Operation Temperature: -10C°～40ºｃ
  Tank Capacity: 4L
  Test Tube Capacity: 120CC
  Ultrasonic Frequency: 40KHZ
  Rotation Speed: 0～10000r/min
  Step: 50r/min
  Time Counting Range: 0～10000 sec
  Step: 50 sec (adjustable)
  Oil Pump Pressure: 1.8kg/cm²----10kg/cm²
  Fuel Flow: 4.5 L/min
  Dimension: 600mm*500mm*750mm
  Weight: 55kg

• 1,LIGHT

     Background lamp switch.

  2,RESET

     Resume the original state of the system.

  3,DRAIN

  Drain back liquid to tank. 

  4,PUMPING

  Start and stop oil pump.

  5,AUTO

     Auto detecting and cleaning process.

  6,PULSE

     Pulse output.

  7,ATOMIZATION

  Full open injector and atomization observation.

  8,TEST

     Press the key to start the testing process.

   

  9,STOP

     Press the key to stop the testing process.

  10,ULTRASONIC

      Start signal output to injector for ultrasonic cleaning.

  11,-

     Parameter decrease key.

  12,CHOICE

      Select different parameter to adjust.

  13,+

      Parameter increase pressure.

  14,Up: Increase pressure

  15,Down: Decrease pressure

  16,INDICATOR LAMP 

  17,ROTATION SPEED INDICATOR

      When this indicator is on, the displayer show rotation value.

  18,PULSE DURATION

      When this indicator is on, the displayer show pulse width value.

  19,REV. COUNT

      When this indicator is on, the displayer show injection times.

  20,TIMING

   When this indicator is on, the displayer show total injection time.

  21,ULTRASONIC

   When this indicator is on, the displayer show ultrasonic cleaning time.

  22,PRESSURE GAUGE

TAIAN FOX MACHINERY CO.,LTD

WEB http://www.dieselinjectiontest.com

tel/whatsapp:+8615725832131

Contact: Mr. Gao