Active Member
|
[China]
Address: 3rd Floor , No.1 , Shou zhi Road , Gou Jia Kaifa qu , ShangAn JingSha , Danzhao Town , NanHai District , Foshan City
Contact name:Merry
Foshan Dechang Technology Co., Ltd. |
|
|
Roller die-cutting anvil sleeve Paper-cutting Youli rubber pad for carton packaging machine
Product Feature :
1. High-quality stainless steel buckle, imported high-strength polyurethane, wear-resistant, pressure-resistant and high-resilience characteristics, to ensure that each die-cutting is crisp and neat
2. The seam is tight and the connection is firm, ensuring the most efficient die-cutting during use, and increasing the service life by 2 times
3. Hundreds of specifications are available in stock, suitable for thousands of printing and die-cutting machines
Normal Size of the Roller Die-Cutting Anvil Sleeve /Rubber Pad :
| Spectification of Roller Die-Cutting Anvil Sleeve | |||
| φ271.2*215*8 | φ341.2*125*7.9 | φ388.8*240*8.2 | φ434.4*260*9.5 |
| φ272*130*9 | φ341.2*254*7.9 | φ388.8*252*10.1 | φ440*230*8.4 |
| φ272*260*9 | φ341.2*254*7.9 | φ388.8*253*8.2 | φ440*250*8.4 |
| φ274*217*8 | φ350*250*9.7 | φ388.8*253*8.2 | φ468*240*9 |
| φ278*230*8 | φ356.5*250*7.4 | φ394.5*250*9 | φ468*250*9 |
| φ281.6*125*9.3 | φ378*210*10.1 | φ415*253*9 | φ516.38*252.4*8.2 |
| φ281.6*250*9.3 | φ379*208*9 | φ420*250*9 | φ516.38*252*10.7 |
| φ290*250*8 | φ381*246*9.59 | φ420*250*10 | φ516.36*254*12.1 |
| φ294*250*10 | φ381*408*9.59 | φ433.9*250*8.9 | φ517.3*226*9.1 |
| φ302.9*208*10.1 | φ381*492*9.59 | φ434.4*125*9.5 | φ517.3*414*9.1 |
| φ328.6*275*10 | φ384*250*8 | φ434.4*250*9.5 | φ379*208*9.3 |
| φ332*125*10 | φ388.8*252*10.1 | φ434.4*250*9.5 | φ292.2*25*14.5 |
| φ332*250*10 | φ388.8*125*8.2 | φ434.4*250*9.5 | φ389*250*8.1 |
Usage Suggestion:
1, choose high quality imported knife, according to die cutting products choose die cutting knife tooth shape.
2, choose high-quality waste sponge, according to the die-cutting products to match the height and thickness of the indentation steel line.
3, every time after the replacement of a new rubber pad, the distance between the die-cutting cylinder and the rubber pad cylinder must be adjusted to the initial position. Gradually increase the pressure until just enough to cut the whole piece of paper. The lower the pressure, the longer the life of the rubber pad.
4. There are some places that are not easy to cut off for the newly installed rubber mat and the replacement mold, so excessive pressure should not be added. The bottom pad of the mold blade should be raised to cut off.
5, in the process of using the die cutting high-speed operation, auxiliary die cutting accessories easy to lose need to replace or supplement in time.
6, the mold can be changed according to the actual situation and die cutting product requirements, die cutting board replacement die cutting knife times can not be more than twice.
7, die cutting knife and spring pad need to be replaced in time, life in 150,000 to 300,000 times need to be replaced, and make a good record every time.
How to measure my size?
Answer: the best and most accurate method is to put the rubber mat down on the ground tile, (pay attention to must tile, warping can not) measure the net length of the rubber surface, (not steel plate surface is not the total length of the buckle, is the total length of the glue surface, horse tooth buckle measurement method is also different, consult customer service understanding. Then measure the width can be, general four-die cutting width 125mm rotary die-cutting width 250mm, some four-die cutting after a long time to use the measured width is 130m, the actual purchase of 125mm width can, because after a long time to press and cut both sides wide a few millimeters is a normal phenomenon!
The Die cutting anvil cover used on ourself machine:
Product Picture Show :
Die Cutting Finshed Product :
