Active Member
|
[China]
Address: Room B502,Lane 2250 South PuDong Road,Shanghai,China
Contact name:Jason
Shanghai ShangErBo Import & Export Co.,Ltd |
|
|
16'' Diamond Circular Saw Blade with Segment Type for Cutting Granite
Description:
This model is specially designed for cutting granite. You don't need water when cutting materials, so wet or dry cutting is OK. In order to improve saw blade's quality, we also offer different sizes and crafts for customized service.
Size range: 4''-20'' (105mm -600mm etc.)
Craft: sintered(hot-pressed, cold-pressed), high frenquency welded, laser welded, etc.
| Description | 16 inch(400mm) Diamond Saw Blade for granite cutting |
| Brand Name | SEB |
| Type | Saw Blade |
| Diameter | 400mm |
| Segment Size(L*W*H) | 40x3.6x20mm |
| Inner hole | 50 mm, 60 mm |
| Technology | Sintering and high frequency welding |
| Slot type | Fishhook |
| Saw Blade Material | Manganese steel |
| Silent or Non-silent | as your requirement |
| Advantage | high efficiency, long using life and smooth cutting with no damage to the edge. |
| Usage | For Granite cutting |
| Customized | Quality & specification can be supplied according to customer's requirement. |
Cutting with or without water
Many blades are designed to operate either wet or dry. However,
diamond tools and blades work better when wet, and dry cutting
should be limited to situations in which water cannot or should not
be used. Water will prevent the blade from overheating, greatly
reduce the amount of harmful dust created by cutting, remove the
slurry from the cut, and extend the life of the blade, since
diamond is unable to withstand the forces involved at the elevated
temperatures involved in dry cutting ceramic and abrasive
materials, and will be subject to rapid tool wear and possible
failure.
Service:
1. Quick reply for enquiries and accurate product information.
2. Trial order is accepted, and free samples will be available
after negotiating.
3. We have strict quality controlling system, inspection will run
through the whole production process.
4. Leading time is based on your quantities and the most efficient
performance will be provided.
5. Professional and good pre/after sales service.
