High Speed Natural Diamond Reaming Shells NQ PCD Type for Gas Mining Exploration

High Speed Diamond Reaming Shells NQ PCD Type  for  Exploration , Gas

Specifications

DESCRIPTION:

Reaming shell is used to couple the drill bit with the core barrel. It is suitable for use on all conventional and wireline core barrel. This product is mainly designed to ream the hole to the standard diameter. It can keep the stability of the core barrel. When the old bit is replaced by the new one, reaming shell can also provide sufficient clearance for the new bit. It can also help to resist the abrasion of the core barrel.

The  surface set Reaming Shells are set natural diamonds outside of the shells, generally, with the stone

size 20/30SPC. The rock cutters are flushed smoothly as the well design of the waterways. 

Reaming Shell is set with natural or synthetic diamond,and it is used to couple the dril bit with the core barrel. Its main function is to ream the hole to the correct comstant specific diameter which ensures adequate clearance for the core barrel and sufficient clearance for the new bit which replaces an old one.It also acts as a stabilizer for drill bit.

Reaming Shells are used together with Core Bits, maintaining the hole size and improving drilling stability

Features:

• Acts as a stabilizer for drill bit.
• Be set with natural or synthetic diamond.
• Our reaming shells enjoy the best quality and most special design in the industry.
• High penetration rate
• High core recovery ratio
• Long life of drilling service

Q" Series: AQ,BQ,NQ,HQ,PQ(Front end & Back end Type)

T Series: T36,T46,T56,T66,T76,T86

WT Series: RWT,EWT,AWT,BWT,NWT,HWT(Single Tube/Double Tube)

WG Series: EWG,AWG,BWG,NWG,HWG (Single Tube/Double Tube)

WM Series: EWM,AWM,BWM,NWM

T2/T6 Series: T256,T266,T276,T286,T2101/T676,T686,T6101,T6116, T6131,T6146,T6H

Others: NMLC,HMLC,LTK48,LTK60,ect…