Shenzhen MS Auto Technology Limited |
|
Item Description
Wifi ELM327 interface is able to detect and interpret obd2 / eobd
protocols automatically. It also provides support for high speed
communications and a low power sleep mode. It use AT commands to
communicate with a host device (PC, notebook, iPhone, iPod touch,
iPad and so on). There are plenty of software packages available,
which are fully compatible with this tool. Some of them have pretty
useful features, such as engine running parameters monitoring, DTC
reading and clearing, MPG meter, etc. You can even write your own
software on a specified hardware platform if you wish, because the
AT commands are fully documented and very well explained. This tool
is only 2.7 x 1.25x 0.9 inches, and it comes with a 6 ft OBDII
cable for easy installation. It also includes a power switch
built-in to prevent the need for having to constantly disconnect
your unit from the OBDII port. It is compatible with 1996 and later
vehicles which are obd2 or eobd compliant. Connecting to your
iPhone / iPod touch is made by WIFI connection in adHoc mode.
With proper software installed in the host device, you may have following parameters read out from your vehicle:
Vehicle Speed
RPM
Fuel Consumption*
Engine Coolant Temp
Fuel Pressure
Calculated Engine Load
Throttle Position
Intake Manifold Pressure
Air Intake Temp
Timing Advance
Mass Air Flow
Fuel Level
Barometric Pressure
EVAP System Vapor Pressure
Fuel Trim
Note:
Your vehicle may not support all above parameters.How many
parameters you can get is depended on the vehicle manufacturer’s
implementation.
Multi-Protocol Support
SAE J1850 PWM (41.6 kbaud)
SAE J1850 VPW (10.4 kbaud)
ISO 9141-2 (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (5 baud init, 10.4 kbaud)
ISO 14230-4 KWP (fast init, 10.4 kbaud)
ISO 15765-4 CAN (11 bit ID, 500 kbaud)
ISO 15765-4 CAN (29 bit ID, 500 kbaud)
ISO 15765-4 CAN (11 bit ID, 250 kbaud)
ISO 15765-4 CAN (29 bit ID, 250 kbaud)
SAE J1939
Vehicle Coverage
Work with all models that support the OBD2 standard ( Acura, Alfa
Romeo, Ariel Atom, Aston Martin, Audi, Bentley, BMW, Buick,
Cadillac, Chevrolet ,Chrysler, Citroen, Daewoo, Daihatsu, Daimler,
Dodge, Ferrari, Fiat, , Geo, GMC Holden, Honda, Hummer, Hyundai,
Infiniti, Isuzu, Jaguar, Jeep, Kia, Lamborghini, Lancia Land Rover,
Lexus,Lincoln, Lotus, Maserati, Mazda, McLaren, Mercedes, Mercury,
MG, Mini Mitsubishi, Nissan, Oldsmobile, Opel, Pagani, Panoz,
Peugeot, Plymouth, Pontiac, Porsche Regal, , Rolls Royce, Roush,
Rover, Saab, Saleen, Saturn, Seat, Scion, Shelby Skoda, Smart,
Subaru, Suzuki, Tesla, Toyota, Triumph, TVR, Vauxhall, Volkswagen,
Volvo, Yugo etc...).
For your information:
For your vehicle to be OBD II compliant it must have a 16-pin DLC
(Data Link Connector) under the dash and the Vehicle Emission
Control Information Label must state that the vehicle is OBD II
compliant.
All vehicles from 1996 in USA and Petrol cars from 2001,diesel cars
from 2003/2004 in Europe are obd2 compliant.
Hardware requirements
PC/iPhone/iPod/iPod Touch/iPad
Important: Your PC requires wireless LAN router supporting WiFi
802.11 a/b/g for linking.
Software Requirements
- All ELM327 based software
- iOS base software in Apple store: Rev / FUZZYCar / DashCmd /
SpeedPORT / Nova Scan
Attention: iOS base software are not included you must buy from
Apple App Store! we only offer PC version software &
Instructions manual (on the CD)
Technical Specifications
SSID: WiFiOBD
IP: 192.168.0.10
Subnet: 255.255.255.0
Port: 35000
Range: 50 ft (Line of sight)
Antenna: Internal
Power Consumption: 0.75 Watts
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Package contents
1 x Wifi ELM327 obd interface
1 x Software CD