Active Member
|
[China]
Address: 101-201，Building 4，No.1 Branch of Zhongcheng Life Science Park, No. 14 Zhongxing Road, Xiuxin Community, Kengzi Street Office, Pingshan District, Shenzhen, China
Contact name:wenly
Shenzhen Yurucheng Dental Materials Co., Ltd |
|
|
Zirconia Dental Oven Sintering Furnace Dental Heating Furnace Fast Heating Dental Muffle Furnace
Precautions for sintering Furnace Use
1.Cut off the power when the furnace is not in use.
2. clean the furnace every two months.
Clean Furnace Method:
1. Break waste zirconia (white zirconia) into small pieces of 5-10 mm size.
2. Take 4-6 pieces and place them in the sintered plate (inside the crucible), cover the lid, then take 8-10 pieces and place the sintered plate in the middle of the furnace.
Sintering program:
room temperature----10℃/ min heating rate-heating to 1600℃-----insulation for two hours-------natural cooling.
Burn repeatedly until the white zirconium color permeability is normal and the furnace is clean.
Dental Zirconia Sintering Furance: Mainlyused in dental Zirconia
sintering , and also used in other material Sintering and annealing
Advantage
- Excellent in quality
- Easy operation with touch-screen technology
- High process reliability due to constant temperature control
- Perfect sintering effect
- Save time and electricity, only half the power consumption of normal sintering furnace.
- Non-microwave heating, stable performance
- The fastest program only cost 169 minutes, slow sintering and fast sintering integration
