Active Member
|
[China]
Address: 101-201，Building 4，No.1 Branch of Zhongcheng Life Science Park, No. 14 Zhongxing Road, Xiuxin Community, Kengzi Street Office, Pingshan District, Shenzhen, China
Contact name:wenly
Shenzhen Yurucheng Dental Materials Co., Ltd |
|
|
high quality Multilayer dental zirconia ceramic blocks zirconia ceramic parts for dental lab
We supply dental zirconia blocks, PMMA blocks, wax blocks, milling machine, milling burs for several years
Zirconia Block Introduction
Yucera zirconia block has high strength, excellent permeability and color aesthetic repair effect that suitable for CAD/CAM system and manual system.
Product Features
Safety:No irritation,No corrosion,Good bio-compatibility
Beauty:Natural teeth color can be reproduced
Comfortability:Low thermal conductivity,hot and cold changes do not stimulte the pulp
Durability:Over 1600MPa perturbed strength, durable and useful
| SHT/UT/3D multilayer Sintering Curve | ||||
| Sintering step | Start Temperature(℃) | End Temperature(℃) | Time(Min) | Rate(℃/Min) |
| Step 1 | 20 | 900 | 90 | 9.7 |
| Step 2 | 900 | 900 | 30 | 0 |
| Step 3 | 900 | 1500 | 180 | 3.3 |
| Step 4 | 1500 | 15 | 120 | 0 |
| Step 5 | 1500 | 800 | 60 | -11.6 |
| Step 6 | 800 | natural cooling 20 | 120 | -6.5 |
SHT Multilayer Color Zirconia Block
*Multilayer color
*No need for further dyeing operation
*Suitable for anterior, crown and bridge
Indications: Crown, Inlay, Onlay, 2-5 unit Bridges, Anterior
1. Zirconia is a kind of mineral that exists in nature as oblique zircon. Medical zirconia has been cleaned and processed, and a small amount of alpha-ray remnants remain in the zirconium, and its penetration depth is very small, only 60 microns.
2. High density and strength.
(1) The strength is 1.5 times higher than the second generation of EMPRESS.
(2) The strength is more than 60% higher than INCERAM alumina.
(3) Unique crack resistance and tough curing performance after cracking.
(4) Porcelain bridges with more than 6 units can be made, which solves the problem that all-ceramic systems cannot be used as long bridges.
3. The natural feeling of tooth color and the inconspicuous crown edge are also the benefits brought by the use of zirconia all-ceramic restoration. Especially for patients with high aesthetic requirements, they pay more attention to the advantage of natural color, because this makes the restoration integrated with healthy teeth, which is difficult to distinguish.
4. Did you know? If the denture in your mouth is a metal-containing porcelain crown, it will be affected or even removed when you need to undergo head X-ray, CT, or MRI. The non-metallic zirconium dioxide does not block the x-rays. As long as the zirconium dioxide porcelain teeth are inserted, there is no need to remove the dentures when head x-rays, CT, and MRI examinations are required in the future, saving a lot of trouble.
5. Zirconium dioxide is an excellent high-tech biological material. Good biocompatibility, better than various metal alloys, including gold. Zirconium dioxide has no irritation and no allergic reaction to the gums. It is very suitable for oral cavity and avoids allergies, irritation and corrosion caused by metals in the oral cavity.
6. Compared with other all-ceramic restoration materials, the strength of zirconia material allows doctors to achieve extremely high strength without too much abrasion of the patient’s real teeth. Among them, Vita all-ceramic plus yttrium stabilizes zirconia. It is also known as ceramic steel.
7. Zirconium dioxide porcelain teeth are of extremely high quality. It is said that its high quality is not only because of its materials and expensive equipment, but also because it uses the most advanced computer-aided design, laser scanning, and then controlled by computer programs. It is perfect.
We have already passed the CE and ISO certification.
I’m sure that our factory is good enough for your program in Italy.
Welcome any comments.
Many exhibitions around the world have promoted the exchanges between us and our peers and made us better
FAQ
Q: What products do your factory produce ?
A:Our main products are ceramic denture zirconia block, corresponding CAD/CAM equipment, 3D printing equipment and other related
dental products. As professional oral materials supplier, we can provide digital dental materials, dental equipment, and full
range of digital products and services.
Q: What about your standard delivery date?
A: Normally delivery time: 2-20days:.According to stocks and orders for production.
Q: What about your package?
A: We use standard export packing.To make products safe ,no demage 100%
Q: Do you have guarantee on your products?
A: We guarantee the goods produced is same as standard ISO9001,CE,FDA
Q: How will you treat quality complaint?
A: First of all, Yucera Has strict quality control, We have responded to professional inspection before shipment . It will reduce the possibility of quality problem to near zero. If this is really a quality problem caused by us we will send you free goods for replacement, or refund you're the loss.
Q: Is there discount?
A: Sure, different quantity will have different discount.
Q: Can I have sample?
A: Yes, but sample is charged and customers pay freight charge.
Q: Why choose Yucera dental products?
A: 1 High quality of made in China
2 Excellent service for customers : From Chosen products, Pack, Shippment,
Clear customs,Import tax. We are flexible for customers’ requests.
3 Keep good relationship with old customers
4 20 years in dental
5 After sales have guarantee
6 Reasonable price , Nice pack, for dental market
Our main products are dental zirconia block, corresponding CAD/CAM equipment, 3D printing equipment and other related dental products. As professional labouratory materials supplier, we can provide digital dental materials, dental equipment, and full range of digital products and services.
If you have time, please pay a visit to us. I think a lot of item will match your interest, and really hope to establish business relationship with you
