Active Member
|
[China]
Address: 2nd Floor,1st Building,West Area,Honghualing Industrial Park,No.88,North Zhuguang Rd,Nanshan District,Shenzhen,China
Contact name:Mr Kain
Shenzhen Xiangtong Co.,Ltd. |
|
|
X-CERA HT: High strength and translucency, apply to coping, coping
bridge, all kinds of bridges!
XTCERA Zirconia blocks are dedicated to being used in the Dental laboratory or milling center field to make crowns or copings for final restoration in the aesthetic zone. It is a consumable required by specific CADCAM milling system machine. By itself it is presintered zirconia blank.
System compatible
Chemical Composition
| Component | Content |
| ZrO2+HfO2 | ＞90.5wt% |
| Y2O3 | 9.28wt% |
| AL2O3 | ＜0.5wt% |
| Other Oxides | ＜0.5wt% |
Properties
| Projects | Detection result |
| Sintering Density | ≥6.0g/cm³ |
| Bending Strength | ≥750MPa |
| Vickers Hardness | 1250HV |
| Chemical Solubility | ＜100μg/m² |
Sintering program:
Show case:
Specification:
The Zirconia blank is made from biocompatible zirconium dioxyde.
The yttrium oxide stabilizing protects the material against
cracks and increases the tensile and compressive strength.
The special grain size allocation inside the material and the added aluminium oxide also result in extra strength during milling and subsequently in clinical use.
