Active Member
|
[China]
Address: 2nd Floor,1st Building,West Area,Honghualing Industrial Park,No.88,North Zhuguang Rd,Nanshan District,Shenzhen,China
Contact name:Mr Kain
Shenzhen Xiangtong Co.,Ltd. |
|
|
Unique 3D White, which leaves you more space of dyeing and imagination!
Ultra Translucent Zirconia Block
1. Ultra translucency with total light transmission rate >50% (comparable to lithium disilicate)
2. Average strength over 800 Mpa (can be used in a variety of all-ceramic restorations such as onlay/inlay, crown, bridge and so on)
3. Highly accurate Vita standard coloring liquid to meet the requirements of high standard dental restoration
4. Excellent machinability owing to unique shaping technique
5. Top quality medical-grade nanometer zirconia powder
6. Ok for Anterior + Posterior teeth
| layer | Proportion | Vickers Hardness(HV) | Strength(MPa) | Translucency |
| layer 1 | 20% | ≥1250 | ≥750 |
55%
↑
43% |
| layer 2 | 20% | ≥1270 | ≥920 | |
| layer 3 | 20% | ≥1290 | ≥950 | |
| layer 4 | 20% | ≥1310 | ≥1000 | |
| layer 5 | 20% | ≥1350 | ≥1100,≤1250 |
Features:
Unique Dyeing System
White but Translucent with Natural Gradient
Flexible Coloring to Make Teeth More Natural
Indications
XTCERA 3D White is intended for the fabrication and preparation of
copings, full anatomical/ full
contour crowns, bridges up to three uints, inlays, and onlays for
anterior restorations.
Note:Directing arrow is marked on the label of multilayer blanks,
which points to insical surface.
Chemical Composition
| Component | Content |
| ZrO2+HfO2 | ＞90.5wt% |
| Y2O3 | 9.28wt% |
| AL2O3 | ＜0.5wt% |
| Other Oxides | ＜0.5wt% |
Properties
| Projects | Detection result |
| Sintering Density | ≥6.0g/cm³ |
| Bending Strength | ≥750MPa |
| Vickers Hardness | 1250HV |
| Chemical Solubility | ＜100μg/m² |
