Active Member
|
[China]
Address: Guandaohe Village, Yuquan Office, Dangyang City, Hubei Province, China
Contact name:Jason Shao
Sinoma (Yichang) Energy Conservation New Material Co., Ltd. |
|
|
ISO CE Certificate Fiber Cement Board Full Automatic Solar Panels Production Line
Main Product Specification: 2440 x 1220 x 6mm (L x W x T)
I Technical requirements of Fiber Cement Board production line:
1. 1 Product specification: L x W x T: 2440 x 1220 x 6mm.
Special sizes can be ordered specially.
1. 2 Quality Standard:
| Item | Unit | Data |
| Density | g/cm3 | 0.9-1.20 |
| Flexural Strength | MPa | >9 |
| Heat Conductivity | w/m. k | <0.29 |
| Shock Resistance | kJ/mm2 | >2.0 |
| Screw Withdrawal Force | N/mm | <0.2 |
| Non-inflammability | Complying with GB8624A, inflammable |
1. 3 Others:
(1) Theoretical capacity: 15000m2/day
(2) Pre-curing time: 6h
(3) Daily productive time: 22.5h
(4) Quantity of autoclaves: 2
(5) Specification of autoclaves: Φ2.2 x 32m
(6) Running time of autoclaves: 24hours uninterrupted curing
(7) Autoclaving period: 16 hours in average (This period is estimated based on experience. Actual period will be decided according to lab test after confirming raw materials)
(8) Reserve of main raw material:
Dosage of fiber material should last for 7days.
Dosage of powdery material such as cement, quartz powder should last for 3days.
1. 4 Basic requirement for quality of raw materials:
Silica sand: SiO2≥95%, Fineness: residue on 200 pore sieve <10%
Cement: ordinary Portland cement with grade of above 32.5.
Slaked lime power:
CaO + MgO ≥75% MgO ≤5%
Fineness 0.088mm, weight of screen residue <15%
Pulp: without sulfate needle wood pulp or kraft pulp, pulping degree is 20 ~70°SR
Above mentioned contents are basic requirements for raw material. In some circumstances, qualified calcium silicate board can also be produced even with different raw materials, while the raw materials should be analyzed particularly so as to confirm its adaptability.
