Active Member
|
[China]
Address: No. 12, Chuangxing Road, Baisha, Humen Town, Dongguan, Guangdong, China
Contact name:Calin Deng
GUANGDONG RUIHUI INTELLIGENT TECHNOLOGY CO., LTD. |
|
|
Metal plate straightening machine stamping, Guangdong straightening machine uncoiler
Heavy-duty material racks are the most used material for unloading and unwinding in slitting, stamping and shearing production lines. Heavy-duty material racks are divided into many types depending on the width of the applicable materials, but not only in the actual purchase of heavy-duty material racks. Use the width of the material, but also comprehensively understand the thickness of the material used, the layout of the production line, the inner diameter and outer diameter of the coil, the weight of the coil, the surface degree of the unwinding material, and comprehensive comprehensive considerations can be selected to truly suit the stamping. Processing and production of heavy material racks.
1. Pneumatic press arm: The pneumatic press arm is a device that prevents the material from being loosened and provides a certain running power when unwinding. The main purpose of clarifying the thickness of the material is to see if it is necessary to increase the pneumatic pressing arm. Usually, the material unwinding of 2mm or more is recommended to be equipped with a pressing arm for the heavy material frame.
2. the size of the material frame shrinkage reel and the height of the fuselage need to be customized. The standard model of Ruihui Heavy-duty Material Rack is 508mm, and the outer diameter of the coil is 1200mm. Many customers use the coil instead of the standard coil.
3. Whether the load of the material roll, oil pressure expansion, and loading trolley need to be equipped. The deciding factor of these three points is the weight of the material roll. The Ruihui heavy-duty material frame has a standard load. If it exceeds the standard weight, it needs to be customized.
4. Does the material rack sensing method need to be changed? Ruihui
standard heavy-duty material frame uses 12V induction power supply
induction control mode. If the surface of the material is not
conductive, it needs to be replaced by micro switch or
photoelectric switch for induction control.
Specification:
| Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
| Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
| Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
| Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
| Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
| Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
| Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
| Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
| Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
| Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
| Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
| Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
| Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
| Power(V) | 3 Phase 220V/380V/50HZ | |||||
| Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 | ||
Straigtening performance:
| tock Thicknees (mm) | Stock Width (mm) | |||
| 0.3 | 400 | 500 | 600 | 800 |
| 0.4 | ||||
| 0.6 | ||||
| 0.8 | ||||
| 1.0 | ||||
| 1.2 | ||||
| 1.4 | ||||
| 1.6 | 470 | 470 | ||
| 1.8 | 400 | 400 | ||
| 2.0 | 360 | 360 | ||
| 2.3 | 300 | 300 | 300 | 300 |
| 2.5 | 230 | 230 | 230 | 230 |
| 2.8 | 150 | 150 | 150 | 150 |
| 3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi
