Active Member
|
[China]
Address: Room 601, building no.7, no.3 industrial zone. South of the village community of the citizens streed of guangming new district,Shenzhen
Contact name:Emily
Shenzhen Zhenhua Qunying Electronics CO. ,Ltd. |
|
|
50HZ Low Voltage DC Contactor 24vdc Contactor Coil Current 200 Amp Available Any Way To Install
1. Product summary
JQ-200D(B)/48-48BW DC contactor has a set of bridge normally opened contactors with load current up to 100A. Accord with GB1408.4-2010/IEC60947-4-1:2009 Ed.3.0.MOD, YD/T585-2010. Suitable for communication power equipment electrical control device.
2. Usage condition
| Ambient temperature: work | - 40 ~ + 60 storage and transportation: - 40 ~ + 70 |
| Relative humidity | 98% at 40 |
| Altitude | not more than 2000 meters |
| Vibration | 10-55hz |
| Amplitude | 0.35mm |
| Impact | 30m/s2 |
3. Standard,safty and environmental protection
(1) Comply with GB14048.4-2003 / IEC60947-4-1:2000 low voltage switching equipment and control equipment electromechanical contactor and motor starter standard；
(2) YD/T585-2010 General credit distribution equipment technical conditions.
4. Specification Reprsentation
| JQ-200D(B)/48-48 BW | |
| JQ | DC contactor |
| 100 | Rated load current 100A |
| D | Normal closed |
| (B) | Communication power |
| 48 | The coil voltage |
| 48 | The contact voltage |
| A | Single coil |
| W | Bending mounting plate |
5. Parameter table
| Parameter | Coil voltage of contact circuit |
| Voltage range | 6-220v |
| Coil power | 5-8w |
| Normal state | Normal closed |
| Main rated load current of contact circuit | 200A |
| Rated voltage of contact circuit | 6-80v |
| Sucking time | 40ms |
| Releasing time | 40ms |
| Mechanical life | 100000times |
| Electric life | 1000times |
| Coil resistance | 603.6-708.4Ω |
6. The circuit diagram of the configuration, installation and terminal
7. The difference between High voltage DC contactor and low voltage DC contactor
with the small current switch control of high-current electrical appliances, operating to reduce the risk factor, the contactor can achieve remote control, maily used in the frequent start of the device.
The realization of small current switching control of high current electrical appliances and to achieve the control loop and the main circuit isolation.
8. DC Contactor comparison
9. Analogue products show
