Shenzhen Zhenhua Qunying Electronics CO. ,Ltd. |
|
High-current Load Devices JQ - 100H(B) / 48 - 48BW Dc Contactor Relay Circuit Breaker For Forklift
1. Product description
JQ-100H(B)/48-48BW DC contactor has a set of bridge normally opened contactors with load current up to 100A. Accord with GB1408.4-2010/IEC60947-4-1:2009 Ed.3.0.MOD, YD/T585-2010. Suitable for communication power equipment electrical control device.
2. Order mark standard
JQ-100H(B)/ 48 - 48 -B- W
JQ: DC contactor
100:Rated load 100A
H:Normally opened
(B): Communication power
A:double coil
48: The contact voltage
48: The coil voltage
W:bending mounting plate
3. Usage condition
Ambient temperature: work | - 40 ~ + 60; storage and transportation: - 40 ~ + 70 |
relative humidity | 95% at 40 |
altitude | not more than 2000 meters |
Vibration | 10-55hz |
amplitude | 0.35mm |
impact | 30m/s2 |
4. Standard,safty and environmental protection
(1) Comply with GB14048.4-2003 / IEC60947-4-1:2000 low voltage switching equipment and control equipment electromechanical contactor and motor starter standard;
(2) YD/T585-2010 General credit distribution equipment technical conditions.
5. Parameter table(current actual production parameter)
No. | requirements | unit | 24 | 48 | 54 | 60 |
1 | Coil resistance under 20℃ | Ω | 168 | 656 | 820 | 938 |
Coil consuming resistance | W | 3.42 | 3.51 | 3.55 | 3.83 | |
Coil resistance error | Ω | ±8% | ±8% | ±8% | ||
2 | Action features | |||||
Cold suction voltage:45~75%Ue | V | 10.8~16.8 | 19.2~33.6 | 24.3-33.5 | 27~37.2 | |
Cold release voltage 5%Ue~40%Ue | V | 2.4~9.6 | 4.8~19.2 | 5.4-21.6 | 6~24 | |
Contact pressure drop of main contact | mv | 100A≤80 | 400A≤150 |
6. The circuit diagram of the configuration, installation and terminal
7. JQ-100H(B)/48-48AW current curve
8. Main products