Active Member
|
[China]
Contact name:Wang
Changzhou Prevail Motors and Electrical Equipment Co., Ltd |
|
|
Servo Motor Controller
Up to this point, the components explained above can essentially take in a control signal and deliver a specific amount of current to a motor - the motor will then turn and the amount that it turns can be seen by the encoder. The job of the servo motor controller (or commonly referred to as the motion controller) is to close the loop on the system by constantly looking at the encoder signal and applying a torque to the motor in order to control it. The simplest form of this is to hold a specific position. In this scenario, if a disturbance causes the motor to move off of a position - the encoder detects this change in position - creating an error signal. This error signal is then translated into a commanded current by the controller in order to drive the motor back to the original position. A more advanced case is when the controller wants to move the motor to a new position. In this case the controller creates the desired motion profile using a specific acceleration, deceleration, and speed. In a very fast loop, the controller commands a specific position for the motor at a precise time - this results in the motor rotating along the desired motion profile.
Warranty | 3months-1year |
Certification | CE |
Input Voltage | DC 24 / 48V |
Rated / Peak Current | 8A / 24A |
Feedback | Incremental Encoder with HALL |
Incremental Encoder | RS232/RS485/CAN |
Digital I/O | 4 IN 3 OUT, Optocouplers Isolation |
Special Interface | 1 output for clutch brake |
Hardware Protection | Low Voltage, Over Voltage, Over Current, Overheating |
Working Temperature | -20℃ ~ 55℃ |
Weight | 0.2 KG |
Application | for Swing Gate / Flap Gate / Sliding Gate etc |
Servo Motor System Components
1. Low noise and long life
2. Efficient and energy saving
3. Wide range of uses
4. Tamagawa 2500PPR incremental encoder
Company Introduction
Changzhou Paliwei Motor Co., Ltd was a high technology industry
zone in Changzhou, China. Our products are used in many kinds of
machines, such as 3d printers CNC machines, medical equipment,
weaving printing equipment, and so on.
Q: How to order?
A: send us an inquiry → receive our quotation → negotiate details →
confirm the sample → sign contract/deposit → mass production →cargo
ready → balance/delivery → further cooperation
Q: How about a Sample order?
A: A sample is available for you. please contact us for details.
Once we charge you a sample fee, please feel easy, it would be a
refund
when you place formal order.
Q: Which shipping way is available?
A: DHL, UPS, FedEx, TNT, EMS, China Post, Sea are available. The
other shipping ways are also available, please contact us if you
need ship by the other shipping way.
Q: How long is the delivery [Producing] and shipping?
A: Deliver time depends on the quantity you order. usually, it
takes 15-25 working days.
Q: My package has missing products. What can I do?
A: Please contact our support team and we will confirm your order
with the package contents. We apologize for any inconvenience.
Q: How to confirm the payment?
A: We accept payment by T/T, PayPal, the other payment ways also
could be accepted, Please contact us before you pay by the other
payment ways. Also 30-50% deposit is available, the balance money
should be paid before shipping.
