|
[China]
Trade Verify
Address: No. Xingguangxi Road,Longquanyi District,Chengdu,Sichuan,China
Contact name:Dai
Chengdu Guoguang Elecric Co.,Ltd |
|
Verified Suppliers
|
|
|
CK-622 30kW/915MHz CW Magnetron
Continuous wave magnetron is 33cm, fixed-frequency, full-metal-ceramic structure, and direct thermal pure tungsten cathode, high-power microwave tubes. Electromagnet attached to the magnetic field from the outside to offer water-cooled tube, the cathode leads to air-cooled, microwave energy from the axial antenna output, can directly stimulate a rectangular waveguide acting as the microwave power source used for heating.
Main Performance
| Frequency | 915±25 MHz |
| Output | 30KW max. (VSWR ≤ 1.2) |
| Anode voltage | 12.5 KV |
| Anode current | 2.8 A |
| Filament voltage | 12.6±1.2V |
| Filament current | 115 A |
| Cold filament resistance | 0.01 Ω |
| Warm-up Time | 60 S |
| Field | 1100 GS (Polar on the middle pole electromagnet ) |
Limited using data
| Minimum | Maximum | |
| Filament surge current | 250A | |
| Filament current | 115A | |
| Warm-up Time | 60S | |
| Anode voltage | 14KV | |
| Anode current | 3A | |
| Anode input power | 35KW | |
| Anode dissipation | 15KW | |
| Load VSWR | Output 30kw ≤1.2, 25kw ≤2.5, 20kw≤3 | |
| Anode cooling water flow | 8L/min | |
| Anode cooling water outlet temperature | 50℃ | |
| Metal surface temperature | 130℃ | |
| Ceramic surface temperature | 150℃ |
Typical working conditions
| Filament current (preheating) | 115A | 115A | 115A |
| Filament current (work) | 100A | 98A | 96A |
| Anode voltage | 12.5KV | 12.5KV | 12.5KV |
| Anode current | 2.0A | 2.4A | 2.8A |
| Output | 20KW | 25KW | 30KW |
| Load VSWR | < 2.5 | < 2.0 | < 1.2 |
| Magnetic flux density | ~ 0.131T | ~ 0.129T | ~ 0.127T |
CK-622 30kW-915MHz CW Magnetron size
