Active Member
|
[China]
Address: Floor 5, Bulding A , Rongxun High-tech Industrail Park, Qinghu Community, LongHua District, ShenZhen(518109)
Contact name:Iris Huang
Shenzhen Wangtong Industry Company Limited |
|
|
The Reverse PoE Switch provides power and data from a single point, using both of Power over Ethernet (PoE) & Reverse Power supply over a single Cat-5 cable. The eight Fast Ethernet ports can be used for any 10/100/1000Mbps link and four of 1-8 port can supply industry-standard IEEE 802.3af power. Advanced auto-sensing algorithm gives power only to IEEE802.3af end devices, so no need to worry about damaging proprietary PoE or non-PoE equipment. In addition, it discontinues the power when PoE devices are disconnected. Easy and reliable, the Reverse PoE Switch automatically determines PoE requirements, speed, duplex, and cable type using Auto Uplink™.
The affordably priced Reverse PoE Switch
delivers PoE to any small business network that wants to simplify
the installation of wireless access points and IP-based
surveillance cameras or FTTH PON system . These devices are
optimally installed on a ceiling or high on a wall, away from most
electrical outlets. PoE eliminates the requirement for a dedicated
electrical outlet to power these devices. This allows for
flexibility in situating devices where AC power is difficult to
access and lowers installation costs. Compact and flexible, the
Reverse PoE Switch is ideal for small business FTTH networks that
need to inexpensively use PoE to deploy wireless access points and
IP-based network surveillance cameras.
Feature
◆IEEE 802.3af power or reveres power on up to 8 ports
◆Supply power to wireless access points and surveillance cameras
and FTTH ONU over Cat-5 cabling
◆8 10/100/1000 Mbps Ports with AutoUplink™
◆Supports PoE power up to 15.4W for each PoE port
◆Supports PoE power up to 130W for all PoE ports
◆Supports PoE IEEE 802.3af compliant PDs
◆Supports IEEE 802.3x flow control for Full-duplex Mode and back
pressure for Half-duplex Mode
◆1K entry MAC address table of the Reverse PoE Switch with
auto-learning and auto-aging
◆LED indicators for monitoring power, link, activity and speed
◆External power adapter supply
Application
◆FTTH PON system
◆HD monitor transmission and power supply
◆Wireless AP layout transmission and power supply
◆Network telephone transmission , intelligent house and home
system
◆Intelligent transportation supervisory system (ITS)
◆ High-speed Way supervisory/Tele-Communication System
◆ Security protection system, TV medical treatment
◆ Long-distance Muti-media Schooling, Campus monitoring
◆ Long-distance broadcast television transmission system
◆ High-building Security Protection, Military Tele-Com projects
| Product name | PL-RP1008G |
| Product description | 8 port 1000M(Nonstandard)POE Enhanced fast type Ethernet switch |
| POE Function | REVERSE port2~port8 VOL DC9-57V 45+ 78- Port 1 : Uplink |
| Characteristic | Each port POE signal indicator High quality metal case Curing isolation function Interrupt network loop function Stop broadcast storm DHCP conflict prevention |
| Interface | Lan 2 to Lan 8 port 10/100/1000M- REVERSE POE (All ports support MDI/MDIX adaptive) Lan1 :Uplink Port 1 port DC out 12V MAX 1A(5.5/2.1) Power : +45 -78 Date: 12 36 |
| Forwarding mode | Store and forward |
| network media | 100BASE-TX: And more than 5 types of unshielded twisted pair(≤150m) 1000BASE-TX: And more than 5 types of unshielded twisted pair(≤150m) |
| Performance specification | Bandwidth:1.8Gbps (Non blocking) network delay(100 to 1000M bps):The maximum delay of less than 20 microseconds；MAC:2KB |
| Compatible network protocols and standards | IEEE 802.3i 10BASET IEEE 802.3u 1000BASETX IEEE 802.1Q VLAN bridge operation |
| LEDs indicator | Each port connection status, the working state of system of the power indicator light |
| Power support | DCIN:9V-57V or DCOUT:12V MAX 1A |
| Product size | 160mm*70mm*26mm(L*W*H) |
| Environmental Standard | Working temperature:0°～55°C Storage temperature:-20°～75°C Working humidity:10%～90%,No condensation Storage humidity:10%～95%,No condensation Working height:Altitude 3000 M Altitude(10,000ft) Storage height:3000M Altitude(10,000ft) |
| Safety | surge absorption |
| weight | 0.5kg(+power cable) |
| warranty | 1 years |
